• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6GT project/range report

Frychief, thank you very much. Do you know what the velocity is with that combination ? Thanks again.....
 
No personal experience, but have read of multiple people dropping it due to less than stellar accuracy and really not feeding that great. Always seemed like a solution in search of a problem to me! I believe this cartridge will fade, just as quickly as it came to light. If you are having great results with this cartridge I would like to hear about it!

Paul
 
boltfluter said:
No personal experience, but have read of multiple people dropping it due to less than stellar accuracy and really not feeding that great. Always seemed like a solution in search of a problem to me! I believe this cartridge will fade, just as quickly as it came to light. If you are having great results with this cartridge I would like to hear about it!

Paul
Click to expand...

Interesting.
 
I'm still happy with mine, my placement at matches is due to my skill and not lack of performance from the cartridge. no feeding issues, but I will probably buy the newest reamer version. The early version I got had a tighter neck that require me to neck turn so loaded cartridges are a drop fit into the chamber.
 
boltfluter said:
No personal experience, but have read of multiple people dropping it due to less than stellar accuracy and really not feeding that great. Always seemed like a solution in search of a problem to me! I believe this cartridge will fade, just as quickly as it came to light. If you are having great results with this cartridge I would like to hear about it!

Paul
Click to expand...

No, I'm not shooting one but I'd definitely like to see, hear, or read where shooters are dropping it and they're reasons why. I have no skin in this game but time will tell if you're right or wrong about it fading.
 
boltfluter said:
No personal experience, but have read of multiple people dropping it due to less than stellar accuracy and really not feeding that great. Always seemed like a solution in search of a problem to me! I believe this cartridge will fade, just as quickly as it came to light. If you are having great results with this cartridge I would like to hear about it!

Paul
Click to expand...
I have been shooting the 6GT for 2 seasons with very good results.

There were some who reported feeding issues, many seemed to be using MDT mags. I believe this is mostly shooters not understanding how to tune their magazines. I shoot MDT and AICS mags with no issues, but my mags are tuned. I had to tune mags for 6.5CM as well so the need to tune mags is not unique to the 6GT. It is a requirement of the AICS pattern mags in general.
 
ToddKS said:
I have been shooting the 6GT for 2 seasons with very good results.

There were some who reported feeding issues, many seemed to be using MDT mags. I believe this is mostly shooters not understanding how to tune their magazines. I shoot MDT and AICS mags with no issues, but my mags are tuned. I had to tune mags for 6.5CM as well so the need to tune mags is not unique to the 6GT. It is a requirement of the AICS pattern mags in general.
Click to expand...
i had feeding issues with MDT mags and 6GT too. Another friend of mine also had the same issue. We tuned the feed lips and it works fine now.

Accurate-Mags work well, some may need tuning.
 
ToddKS said:
I have been shooting the 6GT for 2 seasons with very good results.

There were some who reported feeding issues, many seemed to be using MDT mags. I believe this is mostly shooters not understanding how to tune their magazines. I shoot MDT and AICS mags with no issues, but my mags are tuned. I had to tune mags for 6.5CM as well so the need to tune mags is not unique to the 6GT. It is a requirement of the AICS pattern mags in general.
Click to expand...
Todd,

Thanks for the report, always nice to hear from someone that has extensive experience with the 6GT. Glad you are happy with the cartridge.

Paul
 
I have been totally happy with the RCBS Matchmaster set. The sizing die works fine, the window in the seating die is a game changer if you are loading for a 200 round match.
 
Dave Marshall said:
38.5 grains of H4350 is a mild load in any 6xc. Velocity was 3000fps with a 107 and is hardly a brass destroying load. If it was overpressure in Alpha brass, all 150 cases I fired would have more evidence of brass flow or rupture, but they don’t. When the same load is fired in new Norma or Petersen brass in the same rifle and barrel there are zero pressure signs. None. When fired, the base of Alpha cases expands .003”. When new Petersen or Norma is fired, the base expands .001-.0015”. How would any reasonable person not conclude the brass is the issue?


I spent a lot of time and money trying to get Alpha brass to work in my rifles. I was very excited for what I hoped would be American made Lapua quality 6xc factory brass. I implemented every suggestion Alpha offered up to me to remedy the problems, and it literally blew up in my face, twice. It has cost me twice the cost of the brass to repair my rifle.

I will never fire another piece of Alpha brass in any rifle I own. I’m simply sharing my experience with Alpha brass and folks can make their own decision whether they want to use it or not.
Click to expand...
As of late 2021 Alpha brass in 6mm dasher has been very good...takes pressures very well, shoots small groups. Primer pockets are still tight after 4 heavy reloads...I run the same loads as other dasher shooters, and some hotter, most at a grain above book max...and have experimented with 6.5 Staball and 2000MR where velocities reached 3133 fps for SMK 107 gr., 3098 fps for 110 gr SMK, and 3044 fps for 115 DTAC bullets. Over 1200 rds of normal and hot loads...never a blown primer or a loose primer pocket. So I purchased an additional 200 of their cases, as the first 300 have been really good they have been working fantastic for me... Alpha must have fixed the problem of earlier production cases. Just my experience with them, and would recommend them at this point in time.
 
anyone actually shooting a 6gt, how long is your brass ?
my lot is 1.715, but the reamer print is a lot longer, so i am asking.
my brass is normal ?
thanks
 
6bra1k said:
anyone actually shooting a 6gt, how long is your brass ?
my lot is 1.715, but the reamer print is a lot longer, so i am asking.
my brass is normal ?
thanks
Click to expand...
I'll be having a 6GT chambered up next month - my Alpha brass measures (20 random cases) measures from 1.7185 to 1.7205.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,447
Messages
2,195,678
Members
78,901
Latest member
Kapkadian

Share This Page

Back
Top