• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Savage LRPV Parts

I am looking for some information on the Savage LRPV. I recently picked up an HS stock for this model(single shot-no mag well).
My question is, what factory part is used for a sled or follower and the factory gun to guide the bullet into the chamber. I shoot in production class so it is necessary to find the actual savage part or parts.
The parts diagrams I've checked so far do not show the parts I need for this model.
Savage wants a serial number to look this up which I do not have since I will be putting a different barreled(VLP)action in the stock.

I would have asked this question on Savage shooters.com, but unfortunately they are no more.

Thank you,
Brad
 
Last edited:
The single shot stock you have was made for a solid bottom single shot action. I'm not aware of any Savage factory made single shot adapter for a repeater action. There are aftermarket ones as I'm sure you are aware. Savage repeating rifles had a magazine spring and follower which worked well for feeding. You may have to cut out a magazine well or trade the stock off for one with a blind mag well and use the factory follower and spring. That also involves a magazine housing, of which they made a couple of, depending on how the action was machined.
 
My LRPV is single shot solid bottom to the action but I have had Savage BVSS that would load from the top and bought another expecting the same thing and it was a jerry Rigged from the factory single shot with an internal mag that you could not depress and load it was the sorriest excuse of a leftover parts bin deal you have ever seen--It looked like you could load it but was frozen so just the lips to lay a round on and hope it would load--I yanked all that out and put in a sled--I worked with Savage to order the same parts that were in my other rifle and they sent wrong stuff twice so I gave up
LRPV should be solid Post a photo I have some Savage mag parts on hand that may work
 
I have a Savage LRP in the HS Precision stock - it's a Model 12/red trigger - and has a removeable magazine - 4 rounds. I'm not sure what flavour of magazine it is - HS or Savage.
 
Last edited:
This is a guess on my part but if you have a repeater you should have gotten a stock for a repeater with a blind magazine well then purchased a single shot sled that inserts into the magwell. I could be wrong but that is what I am doing. No it is not a Savage part.
 
savage did in fact make a lrpv repeater I have one, in 6mmbr norma 12 twist, flush 3 round removable magazine with metal surround nice shooting gun they make after market single shot sled which i have in mine
 
savage did in fact make a lrpv repeater I have one, in 6mmbr norma 12 twist, flush 3 round removable magazine with metal surround nice shooting gun they make after market single shot sled which i have in mine
That’s new news to me. I’d like to see it. The lrpv rifles were right bolt left port actions. I like learning what I can on savage rifles
 
Here it is right Bolt right port 26 in 12 twist 6br Barrel all stock
 

Attachments

  • 20250702_142241.jpg
    20250702_142241.jpg
    326.1 KB · Views: 45
  • 20250702_142022.jpg
    20250702_142022.jpg
    310.4 KB · Views: 45
  • 20250702_141955.jpg
    20250702_141955.jpg
    303.8 KB · Views: 45
Last edited:
I am looking for some information on the Savage LRPV. I recently picked up an HS stock for this model(single shot-no mag well).
My question is, what factory part is used for a sled or follower and the factory gun to guide the bullet into the chamber. I shoot in production class so it is necessary to find the actual savage part or parts.
The parts diagrams I've checked so far do not show the parts I need for this model.
Savage wants a serial number to look this up which I do not have since I will be putting a different barreled(VLP)action in the stock.

I would have asked this question on Savage shooters.com, but unfortunately they are no more.

Thank you,
Brad
A picture of the action might help
 
This is a factory savage lrpv repeater. Google did savage make a right bolt right port repeater.......
I know they did I just never seen one of those actions come with that particular stock is all. Every one I ever seen was with the green laminate wood stock
 
Its a Hs precision stock .Never seen one myself until I purchased this one from Mr. Bob White at Shooters Corner .. Very accurate rifle the mag feeds very well suprisingly for a 6mmbr but marks the brass up so i shoot it single shot
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,871
Messages
2,205,022
Members
79,174
Latest member
kit10n
Back
Top