Post your most USELESS piece of reloading equipment….

[bozo699]

https://www.midwayusa.com/product/1016143772?pid=714745
I don’t have one, but this looks pretty ridiculous!

$73.00 worth of useless!….look at all the Rdf bullets you could buy for that lol
Wayne

 

[338 dude]

Who makes one that is not hand held?

Hornady

 

[338 dude]

 

[338 dude]

Best one on the market for the price

Hornady

 

[Dave M.]

Why do you keep them??

We gotta take up a donation fund to get some suitable targets sent to this gentleman.

 

[Dgd6mm]

https://www.midwayusa.com/product/1016143772?pid=714745
I don’t have one, but this looks pretty ridiculous!

I'm sure glad Lee didn't make that. Their reputation is bad enough.

 

[uncle fester]

RCBS hand primer. The seating stem is off center and the primer is not seated flat.

Send it back to RCBS. They will make it right.

 

[uncle fester]

MagnetoSpeed Sporter
- can't use it on my ARs
- cannot do a 10 shot ladder because there is a 100% it will miss a shot in the string
- often fails to work at all.

 

[338 dude]

MagnetoSpeed Sporter
- can't use it on my ARs
- cannot do a 10 shot ladder because there is a 100% it will miss a shot in the string
- often fails to work at all.

I’ve had a few problems with my sporter where it kept coming apart. the little red clips were at fault well they replace the entire unit with a new one. well here we are a year later it is well out of warranty and from it coming apart and falling out of my Weiser precision mount ,it has pulled the bayonet jack loose from the motherboard .I got in touch with magneto speed asked for a deal since it was out of warranty did not expect anything for free they are sending me an upgraded Vthree unit how about that !!

 

[bozo699]

Send it back to RCBS. They will make it right.

I think there just made that way , I have a couple and there junk I haven’t used them in 20 years
Wayne

 

[bozo699]

MagnetoSpeed Sporter
- can't use it on my ARs
- cannot do a 10 shot ladder because there is a 100% it will miss a shot in the string
- often fails to work at all.

Mine is the same!…. Take my Oehler P35’s any day!
Wayne

 

[Doom]

Any chronograph.

 

[kenhwind]

I have been watching to see when someone posts that their primer pocket uniformers are their most useless piece of equipment. My primer pocket uniformers are among my most useful pieces of equipment...safety equipment at that.

Danny

I never realized I needed them until I was given a case of empty once fired PMC .38 Special brass that I could not seat the primers, now I use them most of the time especially with new brass or once fired factory.

After correcting the primer pockets on some of that PMC brass, I sold half of them.

 

[338 dude]

I’ve had a few problems with my sporter where it kept coming apart. the little red clips were at fault well they replace the entire unit with a new one. well here we are a year later it is well out of warranty and from it coming apart and falling out of my Weiser precision mount ,it has pulled the bayonet jack loose from the motherboard .I got in touch with magneto speed asked for a deal since it was out of warranty did not expect anything for free they are sending me an upgraded Vthree unit how about that !!

Just picked it up from the post office this morning thanks again Ryan Hey from magneto speed!!

 

[Winchester 71]

Decker.....RCBS......Buchanan 2 handed knuckle buster joke of a press....you need 3 hands to use it and bolting it down totally defeats the purpose of a small press.........after 35 plus years of passing this design around the present maker strutts around claiming to be the inventor of this joke of a press..........

 

[bozo699]

Hornady

21st century, it can be used by hand but he also sells his lathe stand for them
Wayne

 

[danny]

Have not figured out how to load a single round with this dang thing. I gave up trying then gave it to my wife.
View attachment 1345158

Actually, and here is where you are having trouble, that's an inertia bullet puller with a universal shell holder (duct tape). One simply tapes the round to the "whirly thing" below, then you "let it rip". The "guts" get flung into the rear catch basket.

Danny

 

[Tommie]

Moved to new (actually old) house a week ago. The previous owner left some random old reloading equipment. This press is certainly interesting but it won’t accept standard shell holders.

 

[bozo699]

Moved to new (actually old) house a week ago. The previous owner left some random old reloading equipment. This press is certainly interesting but it won’t accept standard shell holders.

View attachment 1345761

RCBS makes an adapter so you can use std. shell holders
Wayne

 

[hogpatrol]

Moved to new (actually old) house a week ago. The previous owner left some random old reloading equipment. This press is certainly interesting but it won’t accept standard shell holders.

View attachment 1345761

Looks like an old Herters. If not already equipped, 7/8-14 die adapters are also available.