Thanks for the answer, I also found that it should be 1/2-20UNF, just wanted to confirm 
AGS Brass Annealer
- Thread starter sharp.shooter.ser
- Start date
dc.fireman
Sling & Irons!
Great job Stefan - a simple cost effective tool for reloading! I've enjoyed reading about and watching the development of the device.
Thank you for your kind words
Impressive compact machine! I can see a simple fix with 4 little detachable feet clips to raise the body to accommodate long cases.
The one suggestion I have is to provide a concise instructional video on the process to properly anneal with your machine. I see so many user posted videos, including one earlier on this thread, where it is being done incorrectly. Personally, I am an anti-tempilac type, and prefer to use the dark room and eyeball technique to set up the timing.
Good luck. Nice to see more re-loading tools not manufactured in China!
The one suggestion I have is to provide a concise instructional video on the process to properly anneal with your machine. I see so many user posted videos, including one earlier on this thread, where it is being done incorrectly. Personally, I am an anti-tempilac type, and prefer to use the dark room and eyeball technique to set up the timing.
Good luck. Nice to see more re-loading tools not manufactured in China!
Riser for the machine is available in web shop
agscustomparts.com
Riser for AGS Custom Annealer - AGS Custom Parts
Riser for AGS Custom Annealer. For those that want and need extra clearance for their brass. Please add to cart when purchasing with the complete unit at no extra shipping cost. Compatible with version 3.
agscustomparts.com
Wanted to "pick your brain" a bit more fellas. Several users asked about digital timers on the unit. My belief is that you cant set the time up the same every time, because it will change from session to session due to differences in gas bottle pressure, and flame setup itself (unless one uses regulated bottle) but maybe I am wrong. In that case, I would have to make the unit larger (most of you like that it is compact) and the price would have to be increased a bit because those digital pwm-s cost quite more. Which rout to take? I would appreciate the input from you, end users
Works very well just the way it is. Digital stuff will not improve the performance for the reasons you already stated IMO.
I would leave the AGS annealer as it is. I have owned one for about a year. Repeatable results are obtained by placing the inner blue flame to touch the neck-shoulder junction, and setting the dwell time with the stopwatch on my phone. Regardless of whether it has a digital timer or not, one should use tempilaq to verify how far below the shoulder the case is annealed. I like the AGS because of the simplicity.
spike-55
Gold $$ Contributor
^^^^^^
i like the simplicity of mine the way it is, I can get add on bells and whistles if needed, not sure you would increase sales enough to offset the cost to make it worth your while??? just my 2 cents.
stan
Thanks fellas. I was thinking adding just a chassis display maybe (that would settle both words), but all that I can find are too big in dimensions as well, almost as the side panel is, plus the depth. Maybe I am not searching for the right thing though. If you know where to look for a micro display that can be mounted on the annealer body please let me know, just to see if it is workable (in mounting sense and price sense as well). Or I ll leave it as is.
Last edited:
New YT review
there are no restrictions on annealers
Last edited:
5% discount for forum users with "forum05" code until end of July
Played around a bit, trying out digital PWM. It looks nice and its more user friendly (fact remains that for repeated results, if not using regulated gas, Tempilaq is necessary). Will also try with larger PWM unit, but the footprint will have to be larger as well.
Attachments
Last edited:
Nice.......I will be buying one soon.
For those wanting it with digital pwm (2.0), its available in the shop now . Regular version is available also.
agscustomparts.com
. Regular version is available also.
AGS Brass Annealer 2.0 - AGS Custom Parts
AGS Custom Parts - AGS Brass Annealer 2.0
agscustomparts.com
5% discount for forum users with "forum05" code until end of August
same discount code for forum users in September
david12601
Gold $$ Contributor
Great experience and machine works great.....had the machine in 6 days........it takes 6 days for midway....Great job Stefen
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.