You know that they say about big carbon footprints...LOLI'm pleased to see you have all the emissions control paraphernalia on that engine.
You know that they say about big carbon footprints...LOLI'm pleased to see you have all the emissions control paraphernalia on that engine.
Pretty is as pretty does.There is no doubt that Savage builds a very accurate factory gun
and there have been lots of custom rifles that have been built on Savage actions, but you will have to ask yourself, do I want to date
or marry an ugly girl????
A vacuum pump used with thin low tension rings, gets you some HP back.is that a mechanical scavenge pump? or fuel with a vent?
I never have. I’ve only got about ten thousand rounds through 700’s, though.If you ever had to hammer out a case from the bolt, you'd know why you need a Sako extractor!
I never have either but I know some folks that did. The fact you shot a lot proves nothing.I never have. I’ve only got about ten thousand rounds through 700’s, though.
While I agree the Tikka is a very well built action and would be worthy of almost any custom build I must be missing something. Most basic Tikka T3 rifles I see are in the upper $700 price range to start.Tikka.
Out of stock with "regular" boltface. Whoda thunk it?The Mac Bros stainless action at $575 will be a good budget build. The tenon threads/dimensions are supposed to be changing to better accept prefits.
EVO Stainless Steel Short Action - Mack Brothers (macbros.com)
Out of stock with "regular" boltface. Whoda thunk it?![]()
I have bought used Tikka’s for $5-700. Count in the value of the factory trigger. I don’t think they need replacing. I do buy the Yo-Dave spring, tho. Also figure the value of the side bolt release.While I agree the Tikka is a very well built action and would be worthy of almost any custom build I must be missing something. Most basic Tikka T3 rifles I see are in the upper $700 price range to start.
When many bought base 700's for $400 or less to scavenge the action I see no way the Tikka can be called "budget" when there are some very nice custom actions out there within striking distance of a Tikka donor.
Flute the bolt because @boltfluter makes them so gorgeous?Why would you need to flute the bolt body, or add a Sako extractor? Neither of these will add an iota of accuracy.
https://www.eurooptic.com/Tikka-T3x-Lite-65-Creedmoor-Synthetic-JRTXE382.aspxWhile I agree the Tikka is a very well built action and would be worthy of almost any custom build I must be missing something. Most basic Tikka T3 rifles I see are in the upper $700 price range to start.
When many bought base 700's for $400 or less to scavenge the action I see no way the Tikka can be called "budget" when there are some very nice custom actions out there within striking distance of a Tikka donor.
I spoke with Mack bros about their action availability. They are doing production runs of them. If you speak with them, they can add you to the distribution list to notify when they are available. I did this and got an email with 2 weeks for a .308 bolt face being available, first come first serve.I think it was only in stock for their first/initial run. After it's changed for prefits, I'd be interested in one, if it's well made.
I bought a creed last year for 470$, they were easily found through at least November for 550. Shop drop shippers and online stores, not Cabelas.While I agree the Tikka is a very well built action and would be worthy of almost any custom build I must be missing something. Most basic Tikka T3 rifles I see are in the upper $700 price range to start.
When many bought base 700's for $400 or less to scavenge the action I see no way the Tikka can be called "budget" when there are some very nice custom actions out there within striking distance of a Tikka donor.
Yes but thats not because theyre the budget route, its because theyre easily modified with parts from mild to wild and everything inbetween
My bit of baiting worked!