Official Gun Pix 'Pride & Joy' Thread

[nakneker]

I just wanted to see if people were looking

 

[swadiver]

My first build, and she's a peach even if I do say so myself.

Savage Target Action
Criterion, .308, 1 in 10, 28 in, bull barrel
XLR Industries Element chassis and butt stock
Murphy Precision stainless steel scope base
Vortex matched scope rings
Sightron SIII 8-32x X 50mm glass

100 yds

attack of the clones!! i liked the first build so much that I "cloned" another one! it's identical in every way. now i can double the pleasure, double the fun. so far the original shoots a bit better than the clone but more rounds through #2 may see that change. time will tell

 

[Dan Hall]

Couple of Dashers and an Anschutz 54.30 BR for fun. The Anschutz is good practice in trigger pulling. It's amazing what you can learn from a rifle that is as sensitive as this one.

 

[22turborimfire]

6 Dasher
Smithed by Clay Spencer
Terry Leonard LR BR stock ,Special select Claro Walnut
Bat B RB,LP,RE
Krieger Barrel .272 neck
Jewel trigger
March 8x80

 

[22turborimfire]

6BR
Smithed by Clay Spencer
Grizzly action rb,LP,re
Spencer barrel .265 neck
Roy Hunter stock Jewel trigger
March 8 x 80

 

[Grimstod]

This is the personal rifle of Bill Goad. He has been experimenting with it on several levels. It is shooting great and has several matches on it now. Please enjoy these photos. More can be found on the website and I was sure to make them large so they can be used as wallpapers.
www.premieraccuracy.com

 

[Fast14riot]

It's not a fancy bench gun or anything, but it's my pride and joy! My prone midrange AR in 6.8

-Alexander

 

[DR1586]

I picked up an Anschutz 54 from a great fella here on the forum. It came with an extra, rough duplicated stock. The stock was kind of similar to the old Anschutz prone stock, but had a really high comb and was larger in overall size. Snice I have two young kids and a busy job, I needed a long term project (like I needed another hole in my head). But I wanted a good smallbore gun that resembled my prone rifles. So I did the following....

Reshape the stock
Cut the butt and fore end to length
Final inletting on action, barrel channel and hand stop rail
Installed pillars and glass bedded it
Shaped the cheek piece to my face
Cut the comb off and installed McMillan hardware

All the inletting and shaping was done with hand tools. Used my buddy's woodworking shop to build a fixture to cut the butt, fore end and cheek piece. FYI, you can use a table saw to create and adjustable cheek piece. You just gotta go slow.

After all the work, the rifle has proven to be a shooter.

 

[Grimstod]

This is a 6PPC Hunter. A slightly improved version of the 6PPC with the shoulder moved forward .030 It placed top 20 in every category of the 2015 Kelbly shoot. Not bad for a rifle made from spare parts and had not et had but one day to do load development.
More photos at www.premieraccuracy.com and there wallpaper sized versions available there too.

 

[Eric Leonard]

3 rifles I shoot most

Farley 6mm PPC
Stiller 243
Rem 6.5x47L

they will do just about anything I ask them to,,

 

[Cigarcop]

Just finished this one up for a guy in De!

 

[Delaware_Ken]

Just finished this one up for a guy in De!

 

[Delaware_Ken]

This Guy in Delaware really appreciates your beautiful work!!!!!!

 

[cncmill]

4" wide Cherry with Red Heart laminated on sides and Redwood Burl for but plate. 6BRX; Borden BR, RBLPRE; custom titanium scope rings. By far, the best one I built so far.

Erick Crouthamel

 

[tydaws]

My dream hunting rifle is finally here!!!

6.5x280 Ackley Improved



Remington 700 Action - Bolt fluted, skeletonized & bolt handle installed by Twisted Barrel
Bartlein 5R #3 SS Barrel 1:8 Fluted 26"
Timney 510 @ 2#
PTG .300 tapered SS recoil lug
Bedded HS Precison stock
Warne Tactical scope base
Warne Maxima scope rings
Huskemaw Blue Diamond 4-16x42
Holland scope level
Atlas Bipod
Built by West Texas Ordnance
Stock Paint by Melodie Yarbrough



100 yard 3 shot group
140 gr Berger Hunting VLD jammed 0.015
H-1000
Federal 210M Primer
Nosler 280 AI Brass

 

[Nuto-BR]

Here are the two uppers I built and the rests I shoot them off of which I also built. The top one is a X-caliber in 20 Practical, 24 in, 1-11 twist, the bottom one is a WOA in 223, 20 in, 1-12 twist. They both shoot 1/2 MOA or better. Both stocks are laminated Maple and Walnut. I reversed the order of the two woods to tell them apart.

 

[JDMock]

Here is my Dasher featuring a BAT B action, 28" PacNor SM barrel (7.5 twist), Sightron 10X-50Xx 60mm scope, Terry Leonard stock. James Mock

 

[savageshooter86]

 

[vahena]

What stock is that you have in the picture, beautiful rifle nice workmemship/
Rob

Just finished this one up for a guy in De!

 

[Cigarcop]

What stock is that you have in the picture, beautiful rifle nice workmemship/
Rob

Rob, it's a PRT Lowboy F Class stock from Ray Bowman