Official Gun Pix 'Pride & Joy' Thread

[TRG300WM]

Black Sako TRG 42 300-WM Stealth with phosphatized finish.
Badger max 50 mounts.
Near manufacturing 20 moa rail,
Schmidt and Bender pmii 5-25x56 side parallax illuminated,
TRG bipod and rear monopod not shown.

 

[birdog]

375 Cheytac
Stiller Cheytac TAC 408 action
Scoville offset carbon fiber stock
Bartlein 1.450 No taper
Bugholes, Southern Precision mated barrel and action
Tim Hewitt fit the 10.5 inch action into block

 

[TRG300WM]

That looks awsome, big investment and should be a shooter with all those great parts, 1.450 No taper wow! real nice rig Birddog you'll have some fun with that, what scope are you going to put on the beast.

 

[birdog]

That looks awsome, big investment and should be a shooter with all those great parts, 1.450 No taper wow! real nice rig Birddog you'll have some fun with that, what scope are you going to put on the beast.

I have a NF ACTAR MOAR T that will probably get the node because of the 120 MOA already in the scope.
It has a 40 MOA rail atop it. When I work out to what that MOA covers and want to try farther, I have an Ivey long range rail that has 150 moa in it. The Ivey rail will set on top of the Stiller 40 MOA rail.
I have another option. I have Ivey 150 moa rings also.
225 MOA will get the Cheytac 350 gr solid past 4 K. That bullet has a BC of 0.988

 

[TRG300WM]

Very cool, be sure to do another post when you have it sorted, pic or even a short video, would lov to see that think bark, i noticed there's no muzzle brake, do you think it has enough weight to tame recoil? What powder are you going to use a Retumbo?

 

[illae]

Surgeon 591, HS Precision PST025, 6CM.

 

[Dave_64]

338 little dave
Barnard Cheytac TAC 408 action
Selfmade stock
Lothar walther 1.2 diameter 32 long

 

[birdog]

Beautiful

 

[cmillard]

Birdog, is that stiller the 1.6"? love dave stiller's actions? I have a predator on my 6BR and my .408 cheytac (in build process) has a stiller 1.6". what does you barrel finish at?

 

[Dave_64]

Beautiful

Thank you very much, do you have a specific reason for the barrel block?

 

[birdog]

Thank you very much, do you have a specific reason for the barrel block?

1.450 inch no taper weighed 15.5 pounds so I felt it needed to be supported by a block and not stress the action.

 

[birdog]

Birdog, is that stiller the 1.6"? love dave stiller's actions? I have a predator on my 6BR and my .408 cheytac (in build process) has a stiller 1.6". what does you barrel finish at?

It was 36 inches before it was finished. Probably 34 or 35 now.
I will measure it when I get it back from having the brake installed.

 

[Phil]

338 little dave
Barnard Cheytac TAC 408 action
Selfmade stock
Lothar walther 1.2 diameter 32 long

Nice work on the stock..........

 

[Dan Hall]

Here's one I just bought from one of our forum members.


6 Dasher
BAT M rblpre action
Benchmark 1-8 barrel
Jewell
McMillan ST-1000 stock
Dwight Scott metal work
Gary O'Cock glue in

Another view. It gets some company in my garage…



6 BR
Nesika…origional Washington state action rblp
serial # MAC 3
Krieger 1-8
Jewell
Scoville stock with custom paint
All work by Mac McCluskey, original owner and Seattle gunsmith

 

[DBailey]

Re: Official Gun Pix 'Pride & Joy' Thread

Another photo.

Trust me, there is a gun in this photo.

Re: Official Gun Pix 'Pride & Joy' Thread

A rifle that lucky has to be a hammer! ;D

Well it actually is a hammer! 200-17X @ 1,000 Twice.

I'm very proud of my long time shooting buddy's Success. He's had an incredible couple of seasons!

Awesome Job Mr. Gosnell.

 

[spitfire_er]

I built these a few years ago. Kinda a kick back to old school custom sporters.

1917 Enfield
Krieger 28" in 338 RUM
Timney trigger
Found a NOS Fajen Rhienhart Walnut stock
Pewter caps (really old school)
bedded, floated, all that good stuff.
Modified Mag and feed rails for proper mag feeding and COAL.
All work done by me!





I also built this guy, but sold it and can't find my "good" photos.

Another 1917 that was a "Rat Rifle" build. Built for about $200! (Not including my time)
Used 308 Douglas Premium Match barrel. Re-threaded, re-chambered. (free)
Stock (not sure what it was) $40 ebay!
Tuned military trigger
Bedded, floated
All work done by me!
It shot 1/2" groups regularly too!

 

[NorCalMikie]

Old school has built in CLASS!!

 

[Grimstod]

Now this is a lot of patches. This rifle even holds a world record. I am sadly not the owner. But I am the one building his website so I thought I would share because this really is a lot of patches.

http://premieraccuracy.com/New Site/Premier Accuracy/index.html

 

[scope eye]

This is my latest, "thank god for tax returns" It's a savage in 22-243 Middlestead with a 12 twist 28" barrel, they action had a sav2 trigger on it. The stock is a Boyds and the Scope is a Swift 6-24X50, I am into it for less than a grand complete so I am very happy with it. Those 69gr and 77gr Sierra's are lasers, I am seeing over 4000 fps with the 69s, and just under with the 77gr.



Dean

 

[cmillard]

I'm an idiot--misread the post. barnard action not a stiller