Official Gun Pix 'Pride & Joy' Thread
- Thread starter Forum Boss
- Start date
my FT/R set up
GA Precision
Templar V2 RBLPLE
Bix n' Andy trigger w/ safety
GRS Hybrid Stock
31" Bartlein 1:10.25 bbl
.340 nk
.199 freebore
NF Comp DDR 2
Joy Pod
Lapua Palma Brass, CCI 450 primer, 200 gr Berger hybrids ".010 off/jump or 2.345 BTO in front of 43.50 gr Varget 2650 fps
GA Precision
Templar V2 RBLPLE
Bix n' Andy trigger w/ safety
GRS Hybrid Stock
31" Bartlein 1:10.25 bbl
.340 nk
.199 freebore
NF Comp DDR 2
Joy Pod
Lapua Palma Brass, CCI 450 primer, 200 gr Berger hybrids ".010 off/jump or 2.345 BTO in front of 43.50 gr Varget 2650 fps
Attachments
Here's my custom 6.5 mm SAUM Remington Mountain Rifle:
True and blue printed Remington 700 short action,
Wyatts extended magazine box,
Defensive Edge custom bolt release,
PT&G spiral fluted bolt with M16 type extractor and PT&G aluminium
bolt shroud/lightweight firing pin assembly,
PT&G Oberndorf custom aluminium bottom metal,
Criterion 1:8 twist barrel, No. 4 contour, fluted & 24 inches in length,
Bedded into McMillan McWoody synthetic stock,
Talley lightweight one piece ring & bases and Bushnell Elite 3500 4-12
scope with DOA 600 reticle.
Weighs 6.5 lbs scoped and loaded.
Currently doing ladder testing, but 62grs H1000 is giving 3050 fps and groups hovering around 0.5 MOA.
I'm back out at the range on Sunday. I am continuing my ladder testing, this time with Hodgon Superperformance. I also want to try some of the 62.0gr & 62.5gr loads from my ladder testing to see how they group, 62.5grs gave me 3072 fps.
True and blue printed Remington 700 short action,
Wyatts extended magazine box,
Defensive Edge custom bolt release,
PT&G spiral fluted bolt with M16 type extractor and PT&G aluminium
bolt shroud/lightweight firing pin assembly,
PT&G Oberndorf custom aluminium bottom metal,
Criterion 1:8 twist barrel, No. 4 contour, fluted & 24 inches in length,
Bedded into McMillan McWoody synthetic stock,
Talley lightweight one piece ring & bases and Bushnell Elite 3500 4-12
scope with DOA 600 reticle.
Weighs 6.5 lbs scoped and loaded.
Currently doing ladder testing, but 62grs H1000 is giving 3050 fps and groups hovering around 0.5 MOA.
I'm back out at the range on Sunday. I am continuing my ladder testing, this time with Hodgon Superperformance. I also want to try some of the 62.0gr & 62.5gr loads from my ladder testing to see how they group, 62.5grs gave me 3072 fps.
Attachments
Last edited:
nakneker
Gold $$ Contributor
Here is my 6.5x47L critter gitter. It was built by Jon Beanland. It was completed in February of this year.
Defiance ultra light action
Hawk hill #3, which is more like a 3b
McMillan classic style "edge/light"
Sniper grey cerakote, urban spectre stk
Timney trigger
1 in 9
This is a fun thread, I enjoy looking at everyone's projects!
Defiance ultra light action
Hawk hill #3, which is more like a 3b
McMillan classic style "edge/light"
Sniper grey cerakote, urban spectre stk
Timney trigger
1 in 9
This is a fun thread, I enjoy looking at everyone's projects!
Attachments
nakneker
Gold $$ Contributor
Here's a 338 Lapua I just received back. It was completed a couple weeks ago.
Defiance Deviant action
Bartlien Barrel
McMillan A5/A3, Gap
Terminator brake
Timney trigger
Seekins CIP bottom metal
The barrel is 28 inches plus the break. This rifle came about after I helped my niece on her elk hunt in Arizona last year. She made a great one shot kill at a little over 700 yards with a trusty 7saum I have, But we were watching a really big bull at a little over 1300 yards and I was imagining myself with the tag. More rifle was needed, so I thought I would get something along those lines built, just in case I get the opportunity.
Defiance Deviant action
Bartlien Barrel
McMillan A5/A3, Gap
Terminator brake
Timney trigger
Seekins CIP bottom metal
The barrel is 28 inches plus the break. This rifle came about after I helped my niece on her elk hunt in Arizona last year. She made a great one shot kill at a little over 700 yards with a trusty 7saum I have, But we were watching a really big bull at a little over 1300 yards and I was imagining myself with the tag. More rifle was needed, so I thought I would get something along those lines built, just in case I get the opportunity.
Attachments
Last edited:
Xlr evolution, savage 110 action, 28" shilen full bull, curly maple adornments, shot a .343" group 1st time out, looking forward to this spring if it ever gets here 
Just got this rifle back yesterday and couldn't be more happier with the way it turned out and how it's all ready shooting during brake in! Big thanks to Ronnie Long of Long Rifles.
7mm saum built on defiance deviant hunter action, #5 taper 9tw Krieger throated for 168gr Berger vlds, with Ronnies muzzle brake, bedded in a McMillan marksman stock and jewel hvr trigger. The brake makes it feel like shooting a .223!!!
7mm saum built on defiance deviant hunter action, #5 taper 9tw Krieger throated for 168gr Berger vlds, with Ronnies muzzle brake, bedded in a McMillan marksman stock and jewel hvr trigger. The brake makes it feel like shooting a .223!!!
Attachments
My first build, and she's a peach even if I do say so myself.
Savage Target Action
Criterion, .308, 1 in 10, 28 in, bull barrel
XLR Industries Element chassis and butt stock
Murphy Precision stainless steel scope base
Vortex matched scope rings
Sightron SIII 8-32x X 50mm glass
100 yds
Savage Target Action
Criterion, .308, 1 in 10, 28 in, bull barrel
XLR Industries Element chassis and butt stock
Murphy Precision stainless steel scope base
Vortex matched scope rings
Sightron SIII 8-32x X 50mm glass
100 yds
Last edited:
View attachment 979594 Xlr evolution, savage 110 action, 28" shilen full bull, curly maple adornments, shot a .343" group 1st time out, looking forward to this spring if it ever gets here
Bob, That is a beautiful rifle.
Take care
Chris
Grimstod
Machinist, Designer, and Shooter.
Father son rifle set.
More details on the specifications here. http://premieraccuracy.com/bulletin-post-father-son-300RUM-7mmRSAUM.html
More details on the specifications here. http://premieraccuracy.com/bulletin-post-father-son-300RUM-7mmRSAUM.html
Alex Wheeler
Site $$ Sponsor
Just finished this 30br for a customer. I really like the paint color he chose!
Alex,
That is a beauty. Awesome paint job. Did you paint it?
Paul
That is a beauty. Awesome paint job. Did you paint it?
Paul
Alex Wheeler
Site $$ Sponsor
I dont do the paint anymore, I have a friend that does them for me.
My first build, and she's a peach even if I do say so myself.
Savage Target Action
Criterion, .308, 1 in 10, 28 in, bull barrel
XLR Industries Element chassis and butt stock
Murphy Precision stainless steel scope base
Vortex matched scope rings
Sightron SIII 8-32x X 50mm glass
100 yds
your bipod is backwards too?!?
Similar threads
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.