Needs a hex head for a socket
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Needs a hex head for a socket
And remember to adjust the torque reading for the extra length of the barrel wrench.
YesWhat kind of action wrench?
What kind of action wrench?
Stahlwille.i several different sizes.I use them for engine rebuilds etc aswell.not cheap but good.What type of torque wrench are you guys using?
On all of them, I use a bit of Dykem layout fluid on the face of the action/lug beforehand to get an idea of the contact.
I would lube the threads and contact surfaces with Molykote-P37 and torque to about 100 lbs.I'm looking for opinions on how folks put barrels on actions... Talking about SS actions and SS barrels here.
Question is about lube and torque value, but mainly the torque.. Do you snug them up by hand or quite tight? Torque values if you use a torque wrench...
Jackie, I believe in the past you decided somewhere around 125 lbs ft... If I recall, Gene agreed with that.
Anybody ???? TIA!
If they are slightly closer then they look. That is about what I get torque to 70 ft lb.Amen, Jackie. As Mike Ezell posted....once it's tight enough, any tighter is just tighter. It's the enough that we have to determine for our own situation. The camera angle makes these marks appear further apart that they are.
Can I get a witness????![]()
![]()