7-6.5 PRC F-CLASS !!!!!!!!!!

[SKWERLZ]

You might take some of that "terrible human beings" for yourself for unfairly judging others. That is not why there is a shortage of reloading components. You should know better.

I concur.
Many of the cases he mentioned aren’t that hard to get if you just look around a bit.

 

[G7BC]

It would not be my first choice.
I use a Wilson 7 Saum inline seater with good results.
The Forester 7 Saum ultra seater works also.
You can Also Get the 6.5-7PRC seater from Short Action Custom if you want to go that rout.

It would not be my first choice.
I use a Wilson 7 Saum inline seater with good results.
The Forester 7 Saum ultra seater works also.
You can Also Get the 6.5-7PRC seater from Short Action Custom if you want to go that rout.

Thank you Sandstorm,
Is this the one you are referring to?

 

[Sandstorm]

The reason I use it is becasue it works and I had one already for the 7 Saum.
However They do make one specificly for the 6.5-7PRC ..Like F-Class products and Short Action Custom.
Its a bit more $ than I wanted to spend and like I said the Wilson 7 saum works.

 

[GLC]

Can anyone confirm if the bullet central 6.5 PRC seater die works for seating Berger Hybrids in the 7-6.5 PRC?

It doesn’t work, I purchased one, lucky Speedy worked his magic and opened it up, also needs a new seating stem.

 

[Alex Wheeler]

A 6.5 seater die is not going to work with a 7mm.

 

[G7BC]

A 6.5 seater die is not going to work with a 7mm.

Thank you GLC and Alex. I went with Sandstorms recommendation for now. Hopefully Erik releases his soon but I'm sure it will be on backorder for awhile when it does. Thanks again.

 

[Sandstorm]

This is a good one from what Im hearing...no first hand experience however,
I sure like the Click adjustment and Zero stop.....pretty slick

Product Page

www.fclassproducts.com

 

[G7BC]

This is a good one from what Im hearing...no first hand experience however,
I sure like the Click adjustment and Zero stop.....pretty slick

Product Page

www.fclassproducts.com

Thank you. Ultimately I will go with the Cortina dies for sizing and seating. I hear they're in a few places out in the wild being beta tested and will have nice features like correct sizing of the base to help mitigate clickers. That being my long term plan made the Wilson seating die a better $ option.

 

[swd]

This is a good one from what Im hearing...no first hand experience however,
I sure like the Click adjustment and Zero stop.....pretty slick

Product Page

www.fclassproducts.com

A good friend has one. He likes it a lot.

 

[G7BC]

Update for those interested. I put in the order notes what cartridge I would be using it for and the nice folks at LE Wilson called me. It's not on their site and is a special order but they are going to send a 7-6.5PRC seating die.(Call them to order) For a sizing die the bullet central 6.5 PRC die will work with the correct bushing. The neck area is opened up enough for the fired 7mm neck to pass through no problem...

 

[Sandstorm]

This is the one Steve Blair posted earlier in another discussion.
He also called them and orderd a custom.
Theyre great folks over at LE Wilson.

 

[G7BC]

This is the one Steve Blair posted earlier in another discussion.
He also called them and orderd a custom.
Theyre great folks over at LE Wilson.
View attachment 1446657

Yes Sir, was only $15 more for the "Custom" die.

 

[Steve Blair]

For a sizing die the bullet central 6.5 PRC die will work with the correct bushing. The neck area is opened up enough for the fired 7mm neck to pass through no problem...

The same is true for the Redding 6.5 PRC bushing sizing die. I use one for 7-6.5 with no problem.

 

[Rook 6]

Whidden can bore out their 6.5 PRC bushing die to handle the 7. $25 up charge.

 

[Willow]

Just out of curiosity, does anyone out there know when Erik Cortina plans to release his 6.5-7 PRC resizing dies? And does he plan to release a threaded micrometer bullet seater?

 

[dthomas]

The same is true for the Redding 6.5 PRC bushing sizing die. I use one for 7-6.5 with no problem.

So there is enough space in the neck area without reaming it larger? Just use the appropriate bushing.

 

[Steve Blair]

So there is enough space in the neck area without reaming it larger? Just use the appropriate bushing.

Correct.

 

[martyj]

Would this round ever make in a repeating rifle?

 

[Sandstorm]

Would this round ever make in a repeating rifle?

Marty for a repeater i would be looking at the
Entire PRC line and not a Custom. That way you have factory ammo available at all times
Just my 2c

 

[stymie12000]

So there is enough space in the neck area without reaming it larger? Just use the appropriate bushing.

The Redding I got, I had to open it up a few thousandth.

I'm using a .317 neck for my chamber reamer.