300 Norma Improved 35 degree

[schw15]

The chamber was based off of the go guage from jgs +1.

 

[rhovee]

.010 is quite a bit. I would be jamming them good. And keep an eye on them for case head separation.

 

[schw15]

.010 is quite a bit. I would be jamming them good. And keep an eye on them for case head separation.

Going to have the barrels fixed and set to virgin brass.

 

[Alex Wheeler]

Good idea

 

[WAMBO]

Tried to buy one at Bullet Central during their Black Friday sale but they're out of stock.

Micron Precision Series - Seating Die, 300 Norma Improved 35 Degree (300NI35AW)​

If anyone has one they're not using I'd like to buy it.
I did post this in the Marketplace also.

Thanks in advance,

Wayne aka WAMBO

 

[shoot4fun]

Tried to buy one at Bullet Central during their Black Friday sale but they're out of stock.

Micron Precision Series - Seating Die, 300 Norma Improved 35 Degree (300NI35AW)​

If anyone has one they're not using I'd like to buy it.
I did post this in the Marketplace also.

Thanks in advance,

Wayne aka WAMBO

Question concerning dies for @Alex Wheeler
My 300NM 35˚ rifle was built by Alex. I bought from the original customer and it came with a set of Hornady dies labeled for the cartridge. Were these dies done by Hornady to your specs or did you do the work on them?

 

[tom]

Man, I get whiney when I get one a quarter of a thou different!

@shoot4fun i believe the Hornady was the first ones available, and is what I run. It's been a good sizer and hasn't given me any reason to "upgrade". I use a Wilson seater Alex made me for seating.

Tom

 

[schw15]

I use a forster seater. I just bought a 300 norma and had the sleeve reamed out to 35 improved and it's been great. It was easy and fast to get at the time.

 

[WAMBO]

I use a forster seater. I just bought a 300 norma and had the sleeve reamed out to 35 improved and it's been great. It was easy and fast to get at the time.

That sounds like a great idea, who did you have ream it out?

 

[schw15]

That sounds like a great idea, who did you have ream it out?

Anyone with the reamer can do it. My smith at the time did it for free. Flatline precision

 

[shoot4fun]

Man, I get whiney when I get one a quarter of a thou different!

@shoot4fun i believe the Hornady was the first ones available, and is what I run. It's been a good sizer and hasn't given me any reason to "upgrade". I use a Wilson seater Alex made me for seating.

Tom

Nah, you're whiney all the time Mouse!

 

[schw15]

Good idea

Good idea

So basically the go guage isn't really necessary and need to base it off of virgin brass. No crush it's to long

 

[Alex Wheeler]

Normally the brass doesnt vary much. The main goal is some light crush. However the smith decides to do that is up to him.

 

[schw15]

Normally the brass doesnt vary much. The main goal is some light crush. However the smith decides to do that is up to him.

I appreciate the info.

 

[kaseyfield]

That sounds like a great idea, who did you have ream it out?

I just had a carbide sizer die reamer made for this reamer design. I'll be in the shop this week playing with the newlon die blanks. I've built alot of dies for my 338 lapua ai reamer so not a newbie on making dies. Figured it was faster then waiting on the micron dies

Kasey

 

[WAMBO]

I just had a carbide sizer die reamer made for this reamer design. I'll be in the shop this week playing with the newlon die blanks. I've built alot of dies for my 338 lapua ai reamer so not a newbie on making dies. Figured it was faster then waiting on the micron dies

Kasey

Thank you for the offer but a member here generously offer up one he had that wasn't be used.

 

[Mahziar]

where did you guys buy your arbor seating die? I reached out to Le wilson and they said they don’t have the reamer

 

[WAMBO]

Bullet Central has a nice one but they're out of stock.

 

[kaseyfield]

I just ream a forester seater or use a rcbs matchmaster seater

 

[schw15]

I just ream a forester seater or use a rcbs matchmaster seater

Never used the rcbs but I really like the forester