Welcome to the new HQ

[Sniperhandle]

View attachment 1750786

Hustlin to get all of the girts up.

Girty what a gash!

 

[LVLAaron]

View attachment 1742963

How would you decipher these drains? They aren't (yet connected) to anything, but they obviously had something in mind.

I'm assuming gravel pit on the left was for a main water line.


#2 is (obviously) for a toilet.
#3 - Shower?
#1 - The only popular in some places sink behind the toilet?

Back to plumbing... Did some digging.

1 - Shower
2 - Toilet
3 - Vent
4 - WTF

Also a guess, that the small pit with no plumbing would have been a sink? Perhaps a sink outside of the bathroom? But no plumbing there...

 

[tobnpr]

Hustlin to get all of the girts up.

Looks like you're cross-furring with 1x4's on the flat?
Consider using 20 ga. DWC (hat channel) instead. Far more rigid, won't flex in the middle like the 1x's will over that long a span.

 

[LVLAaron]

Looks like you're cross-furring with 1x4's on the flat?
Consider using 20 ga. DWC (hat channel) instead. Far more rigid, won't flex in the middle like the 1x's will over that long a span.

2x4's. Pretty common practice for post-frames.

 

[Walt Krafft]

#4 could be another vent or stub up for the sink drain.

 

[LVLAaron]

#4 could be another vent or stub up for the sink drain.

Showed it to a plumber. He said the same thing. He also said the vents are installed wrong; tear it all out and start over. Which I'm fine with. I dont know or like what's going on here

 

[Skedaddle Shooter]

Back to plumbing... Did some digging.

1 - Shower
2 - Toilet
3 - Vent
4 - WTF

Also a guess, that the small pit with no plumbing would have been a sink? Perhaps a sink outside of the bathroom? But no plumbing there...


View attachment 1750813

#4, vent for the toilet? Remove the caps from #2 and #4 and run a fish tape down 4 and watch for it in #2