SELLING Urbanrifleman Barrel Testimonials

[troupe]

Still looking for the Mr. Al challenge of a 17 twist for a 30 BR, send him a couple of barrel blanks and it will tell the story where the Wislon's stands. I think that it may be surprising. Could be the feather in the cap that could be very helpful for you. I whish I was in the position with that type of opportunity.

 

[urbanrifleman]

This was sent to me this morning from my customer Jared.

.69" group. Ten shots.
500 yards.
6 Dasher.
105 Hornady match bthp.

 

[pilediver]

I purchased an entire rifle package from Brad. Mack action, Revolution stock, Urban barrel and nut,
Jewell trigger, trigger guard and hardware.
Had a little work to fit the barreled action of course but just Dremel and small files.
Very happy with this purchase, looks great and shoots great.

 

[urbanrifleman]

Customer sent me this today.

6br 30fb 12 twist

 

[urbanrifleman]

I made these two Savage Large Shanks
.284 Winchester Brux 8.5 twist blanks. Man those Brux barrels are nice.

 

[Lone Hunter]

From today.

6br 30fb 12 twist
View attachment 1527652View attachment 1527653

Brad, Very nice Shooting. You are shooting into the future… Date on target is ahead …. Great shooting anyway.

 

[urbanrifleman]

Brad, Very nice Shooting. You are shooting into the future… Date on target is ahead …. Great shooting anyway.

That was from a customer.

 

[rebs]

what is the difference between and ISSF chamber and an AI 40-degree chamber ?

 

[urbanrifleman]

what is the difference between and ISSF chamber and an AI 40-degree chamber ?

ISSF is a 223 169 freebore

223 Ackley is 40 degree shoulder 223. An ackley holds about 1.5 grains more powder after fire forming.

 

[rebs]

ISSF is a 223 169 freebore

223 Ackley is 40 degree shoulder 223. An ackley holds about 1.5 grains more powder after fire forming.

Thank you, is one more accurate then the other

 

[urbanrifleman]

Thank you, is one more accurate then the other

Both are quite good. The 223 ISSF is for longer bullets. It will go all the way up to 90s.

 

[806guns]

I havent had my 6XC on in awhile, i already know this barrel shoots with 112gr barnes and h4350. MPA rifle with a Stiller tac 30. Took off the 6x47 and here we are.

 

[urbanrifleman]

I havent had my 6XC on in awhile, i already know this barrel shoots with 112gr barnes and h4350. MPA rifle with a Stiller tac 30. Took off the 6x47 and here we are.
View attachment 1536871

Nice!!!

 

[urbanrifleman]

Hey Bradley, I think you were testing AR Comp awhile ago with 6 BRA and 108s and had good results. What loads did you find worked well? Seemed like people weren't listening to you but it makes a lot of sense since H4895 is so popular with 6 BRA and the burn rate looks similar to AR Comp. I've had really good luck with AR Comp in a 12 twist 6 BR and Berger 80s.

29.6 is my favorite.

 

[urbanrifleman]

I have a local customer here in Tulsa that brought me two Brux blanks in 7mm x 8.5 twist. I made him two matching Savage Large Shank barrels in 284 win.

 

[fishnfool]

I have a local customer here in Tulsa that brought me two Brux blanks in 7mm x 8.5 twist. I made him two matching Savage Large Shank barrels in 284 win.

View attachment 1541948View attachment 1541949View attachment 1541950View attachment 1541951View attachment 1541951

Does this customer shoot F Class, if so where?

 

[urbanrifleman]

Does this customer shoot F Class, if so where?

Tulsa Red Castle

 

[kyotekiller25]

Very nice! What barrels are being used?

 

[urbanrifleman]

Very nice! What barrels are being used?

He brought me two Brux blanks.

 

[kyotekiller25]

And these are set up with barrel nuts? Can you do them on Rem 700s? I don't know much about these.