SELLING Urbanrifleman Barrel Testimonials

This is the gun the stock has every action of every gun I own in it A kelby , a Hall , a ranger arms and two different Remington . and now a XP100 with a Urbanrifleman Wilson barrel . Scope is a old B&L 6-24 power .
I changed the bolt handle fluted the bolt and put a lever type bolt release on the other side . And trued the action . And I need to make a new trigger guard for this action .
 

Attachments

  • DSC_2992.JPG
    DSC_2992.JPG
    207 KB · Views: 58
ArtinNC said:
This is the gun the stock has every action of every gun I own in it A kelby , a Hall , a ranger arms and two different Remington . and now a XP100 with a Urbanrifleman Wilson barrel . Scope is a old B&L 6-24 power .
I changed the bolt handle fluted the bolt and put a lever type bolt release on the other side . And trued the action . And I need to make a new trigger guard for this action .
Click to expand...

How does my barrel compare to the others?
 
urbanrifleman said:
How does my barrel compare to the others?
Click to expand...
I'm getting it there . Went out and did some target work to day 12/11/23 . All 3 shot groups and different setting depths . Looks like I'll work with the .005 out of the rifling , and .035 out is pretty good . . what do you think ?
 

Attachments

  • DSC_2995.JPG
    DSC_2995.JPG
    394.4 KB · Views: 66
Last edited:
Shout out to Brad,
I sent him an email today with some questions on re-barreling a savage 12BVSS that I have and told him I knew it was the New Years weekend and don't worry about getting back with me until latter on when he had time.
With in a few minutes, I got a phone call from Brad, and we discussed what I had asked in the email and also other options for what I could do. Very helpful and informative conversation.

Brad I just wanted to tell you thank you here on the forum and I appreciate you taking the time to call.

Happy New Years to Everyone.
 
ArtinNC said:
I'm getting it there . Went out and did some target work to day 12/11/23 . All 3 shot groups and different setting depths . Looks like I'll work with the .005 out of the rifling , and .035 out is pretty good . . what do you think ?
Click to expand...

That looks like a good start. Have you worked on it some more? If not, I think I’d play with powder charge to see if the vertical goes away. Just about every target has some vertical in it regardless of seating depth. The other thing I would do is move the seating depth in smaller increments on the order of .004 or .005 at a time and see if that doesn’t bring it around to shooting dots for you. Hope my two cents worth is helpful to you.
 
jimmymac said:
That looks like a good start. Have you worked on it some more? If not, I think I’d play with powder charge to see if the vertical goes away. Just about every target has some vertical in it regardless of seating depth. The other thing I would do is move the seating depth in smaller increments on the order of .004 or .005 at a time and see if that doesn’t bring it around to shooting dots for you. Hope my two cents worth is helpful to you.
Click to expand...
On 1/2/23 I'm going to the range with 4 loads for 5 shots groups that are .003 increments apart and was 30.5 gr and going to be 31.0 grs of Varget . My scope is a B&L 24pwr and the cross hairs covers the dots , I may get a new scope .
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,976
Messages
2,207,088
Members
79,238
Latest member
claydunbar

Share This Page

Back
Top