Trim it 2 screw size

[Davey Boy]

Any body out there who might know the size of the #12 screw on the trim it 2 trimmers. Also what size the hex key is for that screw. I have the diagram as sent with the trimmer but the sizes are not listed. Just want to get a couple spares in case I round off the heads. They are a tiny set screw.

Thanks Muchly
Dave

 

[Davey Boy]

Anybody?

 

[WillyTP]

Which screw is the #12? If you can post a picture so I know which one you’re looking at?

 

[Trophied]

If it's the stop adjustment screws it's 5/64" hex key and I get .1285 long. Only handle that one over a clean white soft cloth. I didn't when I took it out to measure it for you and feel extremely lucky that I don't need one now. My Trim Pro 2 has a 1/8" hex x .353 thread length set screw in the top of lever lock mechanism if that's the one you're asking about. That's the only one I would consider might be a #12.

 

[Davey Boy]

Can't post a picture as it says my file is too large. This url will take you to the pic. #12 is near the bottom on the right hand side. It is on the cutter head. I have tried contacting Black Widow 3 times with no reply.
OOPs sorry Trophied I didn't see your reply until I was done my reply to Willy. I'll put it up anyway. Sorry about you almost losing the screw. Appreciate that you did that for me. I painted my workshop floor white for that very reason, and have still lost various things.

https://docs.wixstatic.com/ugd/b5aa4b_7bb637d4203c4ffea41f9832d4eb7cda.pdf

 

[Davey Boy]

Well I got home to a message from Juan Ramirez from Black Widow. He is sending me a couple of those set screws for spares. So I say good on them. I like my Trim it 2, fast and accurate as long as your shoulder is accurate. They work Well. So again kudos to Black Widow Shooters.