AckleymanII
Gold $$ Contributor
Great load development! Love the long neck on the XC cases!
Those barrels are doing extremely well, right out of the gate!
Those barrels are doing extremely well, right out of the gate!
Thanks for the info. My JGS reamer is 175FB and I have a throater from PTG. I want to try H4350 with Peterson SRP brass. Did you trim your necks at all? Does not look like it. I will trim to 13.5 to make sure the bullets don't damage while seating.They really shoot. You will need about 180 fb to get above the donut.
Thanks for the info. My JGS reamer is 175FB and I have a throater from PTG. I want to try H4350 with Peterson SRP brass. Did you trim your necks at all? Does not look like it. I will trim to 13.5 to make sure the bullets don't damage while seating.
Finally got out to try this load. Looks like it could be a keeper. Brad at Urbanrifleman did an excellent job on this barrel which is the norm for him.
Thanks Brad
Bad news gents. My 1-8" Krieger is not stabilizing the 88 Hornady ELD-M bullets. Even at 3160fps. I am now moving to 80 gr bullets.That should be just about perfect.
Bad news gents. My 1-8" Krieger is not stabilizing the 88 Hornady ELD-M bullets. Even at 3160fps. I am now moving to 80 gr bullets.
Isn’t this basically a 22-250 with a different name?
That there is funny.No. Sorry you didn't win.
Thanks for playing.
That there is funny.![]()
I vote leave the 22creed out.It'd be interesting to see the 22xc, 22-250, 22GT and 22creed side by side for a comparison.
Wasn't the 6xc originally a 6x22-250 slightly blown out to make the case more parallel so it feeds better?
Why would you exclude the 22 Creedmoor?I vote leave the 22creed out.