• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Starline Brass Suggestions & Mfg. Response

They make a BASIC cartridge with a 223 base. I am not sure how long it is, but I looked at it to make 5.56 x50 RWS. So it should be long enough to form 47mm
 
nakneker said:
Not sure why, I was hoping it would work.
Click to expand...
223 brass is 1.76 or 45 mm long and 222mag is1.850 or 47 mm long . you could use 223 to make 222Mag . But it would be .090 short and would cause a bigger carbon ring in your barrel and they are hard to get out and that carbon ring will effect accuracy big time .
 
ArtinNC said:
223 brass is 1.76 or 45 mm long and 222mag is1.850 or 47 mm long . you could use 223 to make 222Mag . But it would be .090 short and would cause a bigger carbon ring in your barrel and they are hard to get out and that carbon ring will effect accuracy big time .
Click to expand...
Makes me curious if they would make it slightly longer if asked, I doubt it but it might be worth asking.
 
I found it interesting that Starline makes 357 Mag brass for Norma, with the Norma headstamp
Melvin
ravenrocksprecision.com

357 Magnum Brass – Brand new Primed Brass - Raven Rocks Precision

This is brand new primed 357 Mag Brass.  Brass Manufactured by Starline with a Norma Headstamp.  Primed with RWS 4152 Primers (Small Pistol Primers). This brass in bulk packaged. Quantities Available: 500 ct Data for 357 Mag with SPP can be had for free here...
ravenrocksprecision.com ravenrocksprecision.com
 
Last edited:
CloudNein said:
Asked them about making 22 ARC a while back, either got a no reply or they had no plans. Not a surprise, they probably got burnt by 224 valkyrie, and don't want to go down that road again.
Click to expand...

They will probably get there soon as they already make 6.5 Grendel brass, so the ARC cartridges are just a neck down from there.
 
I just emailed and attached this link to Starline. I hope to get a reply. When/if I do, I will post their response.

Thank you all for contributing! :cool:

Mike...
 
This is the reply I received from Starline;
Here is the original thread; https://forum.accurateshooter.com/threads/starline-suggestions.4149601/

Thanks, Mike. I do appreciate not getting bombarded with emails! Most of the calibers on that list aren’t something we are working on but some are (don’t let anyone get their hopes up for Bee or Hornet brass).

Regards,

Hunter Pilant

Process Manager

Chief Ballistician

hunter@starlinebrass.com

1744924335811.png

Starline Inc.

1300 W. Henry Street

Sedalia, MO 65301

800-280-6660

660-827-6640
 
they sure don’t make all of it for hornady or they would have 218bee brass and hornet brass. My experience with both has been nothing alike…hornady has been soft and inconsistent and star line has been great.
 
L1986 said:
they sure don’t make all of it for hornady or they would have 218bee brass and hornet brass. My experience with both has been nothing alike…hornady has been soft and inconsistent and star line has been great.
Click to expand...
I had a Hornady Tech tell me one time that they do have different sources for their brass that was produced to their spec’s.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,845
Messages
2,204,043
Members
79,148
Latest member
tsteinmetz

Share This Page

Back
Top