Smith's who bush firing pins?

[old leghumper]

Looking for someone who can bush an AR-10 bolt/firing pin. Is it even possible.? Inquiring mind wants to know.

 

[jepp2]

Looking for someone who can bush an AR-10 bolt/firing pin. Is it even possible.?

You might be $$ ahead to just go with a HP bolt.

 

[old leghumper]

HP bolt? What it is?

 

[wedgy]

BCM® AR15 Bolt Assembly (HP/MP)

The bolt assembly is shot peened for strength, includes tool steel machined extractor, extractor spring, gas rings, and is Magnetic Particle Inspected (MPI).

bravocompanyusa.com

 

[Richard Coody]

JP bolts are works of art.

JP - Bolt Assemblies

jprifles.com

 

[jepp2]

Since you have an AR-10 or LR308, strongly suggest the JP Enterprises High Pressure Enhanced Bolt. DLC (diamond like coating) makes cleanup a breeze. Just a very small dimple in the primer.

https://www.opticsplanet.com/jp-enterprises-high-pressure-enhanced-bolt-assembly-group.html

https://jprifles.com/1.4.7_Bolt.php?menu_select=HPbolts

 

[old leghumper]

Should have mentioned that my AR 10. is an Armalite

 

[std7mag]

I had always been told shot peening was for stress relief, not for "increased strength".

 

[ebb]

Stress relief or strength neither will made the firing pin any tighter.

 

[marazzi59]

I looked into this myself a few years ago and nobody would do the work. I need to look threw my library though, I might have a good rite up on the subject.

 

[Pawnee Bill]

Just go with JP Rifles High Pressure bolt in your choice of caliber. You'll be glad you did.

 

[LVLAaron]

+1 on the JP bolt. It'll cost you less than having a smith bush one. And you end up with a spare bolt when you're done.

 

[sstkmkrr]

Who's doing Remington 700 Bolts! That aren't busier that a Fiddlers elbow!

Steve M.
sstkmkrr

 

[LVLAaron]

Grimstod? Gretan?

 

[Bamban]

Carlsbad on the forum did an AR10 bolt for us. He did a great job, I might add. The finished bolt stop the primer flow.

Yes, JP is the quick solution, the problem we had at that time, his are just for RH bolt. Don't know either if they offer theirs in LH config now.

 

[spike-55]

Who's doing Remington 700 Bolts! That aren't busier that a Fiddlers elbow!

Steve M.
sstkmkrr

@carlsbad can fix you up with fast turnaround

 

[LCazador]

Should have mentioned that my AR 10. is an Armalite

AR acronym for Armalite?? Now used for every similar platform!

 

[Texas10]

There's almost nothing you can't discover or learn on YouTube.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[skeeljc]

+1 for the JP bolt. I was experiencing pierced primers on a mil spec bolt. Changed the firing pin a few times before purchasing the JP bolt. Problem solved. JP has a better gas seal too.

 

[68W40 Retired]

Bush Firing Pin Hole & Turn Pin | gretanrifles

Read complete description before sending in your bolt.Please do not click on add to cart. There is no need to call us, just send in your bolt, disregard "Contact us to Purchase" unless you have questions about our service. Do not forget your contact information (name, phone number, address, and...

www.gretanrifles.com