Bolt bush job

[Belly Benchrester]

I’m cratering small rifle primers on a Creedmoor with a pretty light load. Even using 450 primers. Who can bush a bolt for me with a fast turnaround time? Thanks!

 

[ND shooter]

Savage, Remington, Winchester,...? Grimstod on here has done my Savages. Carlsbad for my Remingtons. They both are members here. A search will show the info you seek. Check similar threads just below

 

[watercam]

Both Grimstod and Carlsbad can work on any firearm and get you set up with a bushed firing pin.

 

[joe139]

I had Carlsbad do my savage he did a great job

 

[swd]

Carlsbad's work is excellent as is his turn around time

 

[dogdude]

Carlsbad for the Win !

 

[D-4297]

Grimstod has one several for me ; and guys I shoot with . All excellent workmanship , and very quick turn-around , too . Would recommend having the F/P diameter turned down while you're at it , and you might send a second F/P so you'll have a back-up that matches . Rather have it and not need it . Than need it and not have it .

 

[jobhopper66]

^^^dogdude summed it up perfectly. Carlsbad just bushed a bolt for me. He also turned down the firing pin. The turnaround time as well as the workmanship was excellent. On top of that we quite a nice phone conversation.

 

[Dusty Stevens]

Carlsbad is a great choice

 

[Mark W]

I’ve had Carlsbad do some Remingtons and Grimstod has done Savages for me and for a couple of friends. Both do great work at a fair price.

 

[Belly Benchrester]

Thanks everybody! I’ll try to get in touch with @carlsbad

 

[Old Navy]

This has to be first for this topic. Ten guys responded and all agreed it needed to be bushed.

 

[Dusty Stevens]

This has to be first for this topic. Ten guys responded and all agreed it needed to be bushed.

No, when it comes to anybody wanting to blow money on a new gun we all agree then too

 

[boltfluter]

Sako extractor and Bushed. Any recommendations or should I start a new post

Personally, I prefer a Mini-M16 over a Sako extractor. At least it has a mechanical cross pin in case of a pressure problem.
Paul

 

[farmerjohn]

Sako extractor and Bushed. Any recommendations or should I start a new post

Carlsbad and ask him about the extractor, he's done several for me and does a great job with quick turnaround, John