• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Questions about chambering a new barrel on my Vudoo V22

Linko

Silver $$ Contributor
I have a Version 1 V22 action in a KRG Bravo stock. I would like a new bull barrel to be added. I am getting a little better informed about chambering reamers and such. I will be shooting of the bench at 50 yards. I would appreciate some advice on this project.

First question: Barrel length, I see many rifles at 20 or 24" length. What should I be considering? Is longer better like centerfire?

Second question: Chambers. I looked at the PTG website (as an example) and see like a dozen different reamer sizes. Then I read about the Nevis size reamer. I don't know which brand of ammo I will use (Eley or Lapua). Is there a set of chamber dimensions that would be a proven formula. I am sure there are variations that various shooters & Gunsmiths use. I would like some guidance if thats possible.

1.5 or 2.0 degree leade
engagement dimension
headspace
 
I have had really good luck with shorter barrels over the years. That said there is nothing wrong with a 22-26 inch barrel if PRS is your game and you want the rifle to balance better.

Elrod has my Vudoo repeater action right now and is putting on a Kreiger. He will be cutting it off where ever it slugs good at. It is mainly a prone gun so I really dont care how long it ends up being.

Whatever reamer you choose, there are so many better options than PTG. As in all of them.
 
Is this the chicken and the egg?

Select ammo then the reamer or the reamer then the ammo

I will be shooting off a bench no PRS
 
First question would be if this is a repeater or a single shot? Some of the tightest chambers will be difficult to feed into from a magazine.
 
DGP4 said:
With a repeater I would use the Winchester 52D Match reamer.
Click to expand...
Thanks for the concrete recommendation. I see the Winchester reamer is the shortest chamber length of those listed in the chart I posted above.

I will be using either Eley or Lapua ammunition. I wonder if they have different lengths?
 
Paddyd said:
My Volquartsen 20" has a bentz chamber. It REALLY likes SK ammo. Eley not so much.
Click to expand...
Same with, my 20" Green Mtn., SS Bentz Chambered, 10-22 barrel ( w/ Lightly Polished, "Throat area" ).
Barrel Loves,.. SK standard Plus and Wolf Match Extra, Ammo !
.22 LR, hits Max Velocity at,.. 20-21 inches from, my research.
I Use, a Volquartzen Over Sized F-Pin and Extractor for,.. "Reliability".
If, choosing, a Bentz Chamber, you WILL Need to, "Break / Polish" the SHARP Edges of where, the Bullet meets the Rifling,.. IF, wanting to Extract, LIVE Ammo
 
Last edited:
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,230
Messages
2,213,887
Members
79,448
Latest member
tornado-technologies

Share This Page

Back
Top