Official Gun Pix 'Pride & Joy' Thread

[Grimstod]

These are not complete rifles but they do look pretty. There are many more of these and completed rifles on the site www.premieraccuracy.com in the portfolio section. These are all high resolution photos that can be used as wallpapers.

 

[maconusmile]

Here is my first custom Benchrest Rifle. M700 s/s short action, all machining done on 5 axis fixture concentric to bolt bore using single point and full profile tooling. Machined receiver face & lug adjustments. Receiver threads recut .010" over, .300" recoil lug .010" over line bored boltways to .708" for fitted bolt. PTG fluted bolt body ground to .706". Has mini 16 extractor & .062" firing pin hole. Greg Tannel firing pin assembly. Bolt handle properly timed by accu-tig. Kreiger 8 twist LV barrel @ 29" with no turn neck (.272) Bob Hart Laminated stock with bedding block, skim bedded. Holland style pillars, Jewel trigger set @ 1.5 oz. Bat trigger guard. Lawton bolt stop. It's a shooter. Love the 6Br so far. Using lapua brass, annealing with Annie induction annealer every firing, resizing with redding comp bushing neck sizing die. Here are a few pics.

 

[vahena]

Beautiful rifle and you have a nice shop, Good Luck with it.
Rob

 

[Grimstod]

6XC II sitting in a whitetail rack taken this past year.

 

[eric32]

This my rifle after months and months getting it to work just right for PRS.

Rem 700 blueprinted
40X tuned trigger 1.5 lbs
13tw Bartlein 5R
JP Recoil Eliminator
308win
XLR element w/ kydex cover on the front end
PiG skins barricade grips
extended bipod picatinney rail
Atlas bipod
GGG Bungee Sling w/ custom duck tape
SWFA HD 5-20x50
Vortex Scope level
custom throwlever
NF MAG-Mount 30mm(cause why not)

 

[AckleymanII]

That is one heck of a gun!!!

 

[swadiver]

My first build, and she's a peach even if I do say so myself.

Savage Target Action
Criterion, .308, 1 in 10, 28 in, bull barrel
XLR Industries Element chassis and butt stock
Murphy Precision stainless steel scope base
Vortex matched scope rings
Sightron SIII 10-50x X 50mm glass

Update on this build. i changed out the 32x Sightron for a 50x and have been shooting F/TR competitions with it. i got lucky enough to be added to a F/TR team here in Florida. the team just set the National mid range (300,500,600 yds) record for F/TR team shooting. my little build sure did it's part. shot a 199/11x @300, a 197/12x @ 500, and a 198/9x @ 600 yds. shooting the wonderful 185 Berger Juggernauts. it definitely made the job easier for me, the weak link in the chain.

100 yds

 

[butchlambert]

One of my favorite hunting rifles-1917 Enfield in 416 Rigby

My 280AI on a Pierce Titanium receiver, Shilen, Jewell, and Brown custom Kevlar stock.

 

[snert]

One of my favorite hunting rifles-1917 Enfield in 416 Rigby

My 280AI on a Pierce Titanium receiver, Shilen, Jewell, and Brown custom Kevlar stock.

Nothing so beautiful as fine walnut and blued steel. Awesome.

 

[Fast14riot]

One of my favorite hunting rifles-1917 Enfield in 416 Rigby

My 280AI on a Pierce Titanium receiver, Shilen, Jewell, and Brown custom Kevlar stock.

I'd like to see some more detail pics of your 1917, I built my 1917 as a double duty hunt/tactical in original chambering, .30-'06, not much left is original, but it will drop right back into a mil stock with a little inletting for the Timney trigger.

 

[Fast14riot]

This is my Eddystone 1917 in .30-'06. CBI 26" barrel, DT COO conversion to bolt, Timney trigger set at 3.5#, bolt, extractor and follower jewelled, customized 20moa added Redfield Jr. scope base, Bushnell 3200 10x, Boyd's Prairie Hunter stock, modified Voodoo Tactical cheek pad.

Still have to finish the metal work and coat it all flat black, but she shoots quite nice with factory ammo right now, haven't built a load for the new barrel yet.

 

[butchlambert]

I'd like to see some more detail pics of your 1917, I built my 1917 as a double duty hunt/tactical in original chambering, .30-'06, not much left is original, but it will drop right back into a mil stock with a little inletting for the Timney trigger.

Here is a couple more. I have about 12 of mine out to a young man that has a photo studio. Will have more later. I do have another 1917 in 450-500.

 

[butchlambert]

This is my Eddystone 1917 in .30-'06. CBI 26" barrel, DT COO conversion to bolt, Timney trigger set at 3.5#, bolt, extractor and follower jewelled, customized 20moa added Redfield Jr. scope base, Bushnell 3200 10x, Boyd's Prairie Hunter stock, modified Voodoo Tactical cheek pad.

Still have to finish the metal work and coat it all flat black, but she shoots quite nice with factory ammo right now, haven't built a load for the new barrel yet.

Looks good!

 

[Fast14riot]

Man, that sure is pretty and done in a timeless style! I really need to get mine into the studio, but I don't normally photo entire long guns as I do product photography mostly and would need to rearrange everything, lol.

 

[butchlambert]

These were not from a studio. Indirect lighting and blue cloth. My old Canon SD800IS on a tripod.

 

[JMMontgomery]

I was hesitant to post mine...but why not..

Remington 700P 20"bbl, Timney 510 trigger, PTG DBM, APA Fat Bastard brake, McMillian A-5 Adj., Badger 20MOA base, Badger Med. rings, Vortex Razor HDII 4.5-27x56 mil/mil.

 

[loud_noise]

Here is a couple more. I have about 12 of mine out to a young man that has a photo studio. Will have more later. I do have another 1917 in 450-500.

That sir is a thing of beauty!

 

[6BRAckley]

I put together my first 6mm PPC in nearly a decade. Borden RBLPRE action, 20 inch Bartlein 1-13.5 twist barrel, TMBR stock pillar bedded by Tom himself, jewell trigger, 45x Leupold.

 

[6BRAckley]

A couple of the groups from my first trip to range fireforming cases

 

[gat]

My new Baby!!! Been focusing on customer builds for many years it was time to build one just for ME! 6x47 Lapua, Stiller TAC30, Kreiger barrel, Harrells brake, Konohawk Stock, Jewell trigger, Sightron SIII 6-24x 50 shoots in the .1's with Hornady 105's. Almost as pretty as my first wife.....And I've kept her 28 years!!!