• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Looking for Universal De-primer

I have a RCBS universal de-primer die but the de-cap pin is to large a diameter for my 6.5x47 Lapua brass. Does anyone know who makes a universal de-primer die that works with the 6.5x47L?
 
Www.harveydeprimer.com
Great guy to deal with. Tell him you want the SMALL depriming pin. It works great.
 
mrspradlin said:
Www.harveydeprimer.com
Great guy to deal with. Tell him you want the SMALL depriming pin. It works great.

+1 on this. I've had mine for about 2 years. It's been great!
 
I use the Lyman Universal decapping die bought for $19 off Amazon to deprime both my small and large rifle primer cases. Works great.
 
padom said:
I use the Lyman Universal decapping die bought for $19 off Amazon to deprime both my small and large rifle primer cases. Works great.

Flash hole on the 6.5x47 Lapua are a smaller diameter (0.060), I think.
 
I was reading somewhere that you can order smaller decapping pins from Redding. Worst case, chuck the decapping pin in a drill and take off a couple 0.001" on a diamond stone.
 
waldo1979 said:
I was reading somewhere that you can order smaller decapping pins from Redding.

I did order one from Redding; works great.
 
Yep, Redding makes 'em http://www.midwayusa.com/product/763052/redding-decapping-pins-undersized-0057-ppc-package-of-10?cm_vc=ProductFinding
 
If it was me looking for a small primer decapping die I'd just buy another decapping pin from Lee, I'd get some 400 sandpaper put the pin a drill and in less than 5 minutes I would have the exact size I want. And at $15 for the die its pretty hard to beat. YMMV.
 

Attachments

  • Capture.JPG
    Capture.JPG
    72.2 KB · Views: 23
Leade said:
See Neil Jones Custom Products....very cool deprimer....the ppc pin will work
Yeah, this is faster/less cumbersome than the harvey.
http://www.neiljones.com/html/decapping_tool.html
Get the PPC pin & largest cartridge shell holder, and you won't need anything else. The only part I contact of the shell holder is the edge(don't need to capture/fit the casehead).
FAST, and my pockets are cleaning with the cases soon as I get back from the range.
 
I just grind a pin down to knock out SR primers. It is small enuf to push LR primers out also. Thus, my universal decapper never comes apart.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,252
Messages
2,214,945
Members
79,496
Latest member
Bie
Back
Top