Looking for Universal De-primer

[cpl666k9]

I have a RCBS universal de-primer die but the de-cap pin is to large a diameter for my 6.5x47 Lapua brass. Does anyone know who makes a universal de-primer die that works with the 6.5x47L?

 

[Marksman63]

Put the pin into a drilling machine's mandrel and use sand papers (starting from 300 to 1200) for reducing its diameter

 

[Chappy]

Call RCBS. They'll send you the right pin for the PPC flash holes.

 

[Mr.Spradlin]

Www.harveydeprimer.com
Great guy to deal with. Tell him you want the SMALL depriming pin. It works great.

 

[skiutah02]

Www.harveydeprimer.com
Great guy to deal with. Tell him you want the SMALL depriming pin. It works great.

+1 on this. I've had mine for about 2 years. It's been great!

 

[308338]

sinclair makes a universal de-primer with an .080 and.062 depriming pin about 35.00 get tool own one

 

[cpl666k9]

Thanks for the information. I'll get an order going for Harvey.com on Monday

 

[padom]

I use the Lyman Universal decapping die bought for $19 off Amazon to deprime both my small and large rifle primer cases. Works great.

 

[cpl666k9]

I use the Lyman Universal decapping die bought for $19 off Amazon to deprime both my small and large rifle primer cases. Works great.

Flash hole on the 6.5x47 Lapua are a smaller diameter (0.060), I think.

 

[waldo1979]

I was reading somewhere that you can order smaller decapping pins from Redding. Worst case, chuck the decapping pin in a drill and take off a couple 0.001" on a diamond stone.

 

[cpl666k9]

I ended up buying one of the Harvey de-primers with a small pin. It works very well too.

 

[Leade]

See Neil Jones Custom Products....very cool deprimer....the ppc pin will work

 

[/VH]

I was reading somewhere that you can order smaller decapping pins from Redding.

I did order one from Redding; works great.

 

[Joe R]

I have been using a Lee Universal de-primer die and it works well for me, but I've only de-primed about 8,000 308 cases. The pin measures .07 so I don't know if that is small enough for a small primer case.

Here's a link it may be worth a call http://leeprecision.com/decapping-die.html

 

[wmdron]

Yep, Redding makes 'em http://www.midwayusa.com/product/763052/redding-decapping-pins-undersized-0057-ppc-package-of-10?cm_vc=ProductFinding

 

[Joe R]

If it was me looking for a small primer decapping die I'd just buy another decapping pin from Lee, I'd get some 400 sandpaper put the pin a drill and in less than 5 minutes I would have the exact size I want. And at $15 for the die its pretty hard to beat. YMMV.

 

[mikecr]

See Neil Jones Custom Products....very cool deprimer....the ppc pin will work

Yeah, this is faster/less cumbersome than the harvey.
http://www.neiljones.com/html/decapping_tool.html
Get the PPC pin & largest cartridge shell holder, and you won't need anything else. The only part I contact of the shell holder is the edge(don't need to capture/fit the casehead).
FAST, and my pockets are cleaning with the cases soon as I get back from the range.

 

[tenring]

I just grind a pin down to knock out SR primers. It is small enuf to push LR primers out also. Thus, my universal decapper never comes apart.