What's the Best Universal De-primer?

[shooterjon]

https://www.mightyarmory.com/products/the-pua-decapping-die-for-lapua-brass
This is the one you want.

Must admit I used the lee DE Primer for many years ,finally broke the de-priming pin and thought I would try the Mighty Armory de primer.I really like it AND it works great.
PS I de-prime all my cases before reloading ,SO YEP the mighty Armory De Primer get a good work out.

 

[Stray8]

+

FA works really well. It is has a really strong pin, but will not fit the smaller flash holes.

With a little sandpaper and a drill it will fit perfect.

 

[Calgary Bill]

I just ordered one from Cabelas.
I live in Canada and ordering from the US takes 6 weeks minimum.
I'm lucky to find the FA locally.
Thanks everyone for your timely responses.

 

[nakneker]

Switched over to the mighty armor decamping die, I’d never go back, love this thing. It’s a superior design Compared to the standard decappers made by the usual suspects, Redding, RCBS, Hornady etc etc.

Mighty Armory PUA Decapping Die w/ Spring Loaded Primer Flicker

The Mighty Armory PUA Decapping Die is a universal decapping die for depriming small flash hole cases with small flash holes. Recommended for use on all single stage and turret presses. Toughest in the industry!

www.mightyarmory.com

 

[Dstaffk5]

Mighty armory and FW arms make the best decapping dies. They don't even care if they are berdan primed or have a stone in them...they will punch through!

 

[1shot]

My vote is Mighty Armory. Great tool.
Lloyd

 

[Soup]

I've been using the Harvey for years. Works great!!!
Soup

 

[skeeljc]

The key to a de-prime die is alignment. I just make one out of aluminum for each caliber. Just taper bore it to match the case body and deep enough to allow some clearance. Use a de-capping stem from a die set.

I use mine in a RCBS Summit with the short handle. I use some heavy rubber bands to hold the moving part up high enough so the de-prime die clears a case. Then I just need to pull the lever down to de-prime and let the handle go. That way I have blth hands free to remove a case and insert a new one. When I am not using the Summit I just unbolt it and slide it to the back of the bench.

 

[klamathsteel]

Holy Crap !! I cant even believe this is a topic. Push the spent primer out with whatever it takes and start prepping your brass for the next firing. It's that simple !!

 

[markm87]

For me a hand held with a little cup wouldn't cut it. I run weekly loads from two shooters thru my Big Boss II with the Lee decap die.

I've actually put a 1.5" drinking straw in the bottom of the shell holder to force all the primers into the bucket below. No more primers spitting out the primer arm slot!