#174 is unfired Lapua case.
Usually if you analyze brass after first firing that number will be smaller.
start at 66 grains and go up from there is what I'd suggestDid anyone tried N565 with 215gr Berger?
Good information. I have been reading for 2 hours to find thisAMP AZTEC Code
Pilot #21
Fired case
Code: 0168 (case 1), 0167 (case 2)
Manson makes one specifically for F class. It's on their website.What reamer is everyone using? I’m kicking around going to this for f open.
Manson makes one specifically for F class. It's on their website.
Looks like some very good data. Just in case someone is interested:
Looks like some very good data. Just in case someone is interested:
ADG SD: 0.3513
Lapua SD: 0.3504
Can't comment on the brass quality but the data generated indicates good data generation technique .
I tinkered a little but hit pressure signs just as I was starting to hit 2800fps. Powder charge was around 61gr or just north of it from memory. I think H4350 is a touch fast for the 220's and H4831sc is a better option. I run the 220s at 2800fps with H4831sc (64.6gr, 10 thou jump) and it's a lot easier on the brass (ADG). You can't hit super high speeds with the 220s in this cartridge, not unless you're happy tossing your brass after a couple of firings anyway.Has anyone tried h4350 with 220 bergers.
My barrel is 32 inches and I’ll be using lapua brass. Where should I start for powder charge.
