looks like Graf & Sons still has some in stock, keep us posted please I'm a yuge Lapua brass fan but have 8 boxes of ADG so I'm good for now
Lapua 300 WSM brass
- Thread starter antunRC
- Start date
GT Accuracy
Site $$ Sponsor
I just got my dealer shipment notification from capstone/lapua as well. Looks like you were correct
46and2
Silver $$ Contributor
Or shorted one!No more getting one extra piece of brass
Lapua New Packaging
Here's a random handful of maybe 20 with the worst shown from that handful. Brand new. Shameful. Those are worse than any I have ever received from them. However, if I had to bet, my guess is that didn't occur in the small plastic blue box in their travels. During their processing at the...
forum.accurateshooter.com
Precisionhunter417
Silver $$ Contributor
A thing of beauty!
Gone like a freebie cap.No more getting one extra piece of brass
I have a feeling a lot of us may be visiting our Gunsmith’s about a new build because of this.
Precisionhunter417
Silver $$ Contributor
Me hearing that Lapua was making 300 WSM brass is the whole reason why I built my F- open set up
Last edited:
Precisionhunter417
Silver $$ Contributor
For anyone interested the neck thickness is a consistant 0.01475” will my ball mic.
Precisionhunter417
Silver $$ Contributor
Weighing brass is my starting point. Sample size of each single lot was 50 pieces. I was limited to 50 because I only have 1 box of ADG. After reviewing this I may be purchasing more ADG but their neck thickness was all over the place with a thick average. Having a tight neck chamber, I am going to stick with my LAPUA on the new barrel since it offers the best neck thickness fit for my plans. Im not a fan of neck turning.
| BRAND | LAPUA | ADG | NORMA |
| SD in G | 1.12 | 0.35 | 0.96 |
| AVG in G | 244.1 | 232.2 | 251.3 |
| ES | 4.6 | 1.6 | 4.4 |
| Neck Thickness avg | 0.01475" | 0.017" | 0.01525" |
Last edited:
Id be very surprised if the primer pockets hold up as good as ADG. 6.5 prc and 300 prc lapua brass was nowhere near as tough as ADG primer pockets.
drop_point
Silver $$ Contributor
That has not been my experience with 6.5 PRC. The Lapua brass has held up better for me and the neck thickness is more consistent. The ADG 6.5 PRC I've had has been medicore at best.
I took both brands of brass and necked them up to 7mm. I then took a very mild load of h4350, 52.5 gr and a 180 berger, and fired it 10 times in each piece of brass. The primers popped out of the lapua brass with almost no effort at 10 firings. The adg I could not come close to popping out by hand with a wilson decapping pin. Just my expirience with it. Same with 300 prc brass.
drop_point
Silver $$ Contributor
I haven't necked mine up, but primer pockets were gone at seven firings in the ADG, Lapua going strong past 10.
same load in em?
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.