• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ingenuity Precision New Trickler

padom said:
What are you arguing? I've said in numerous posts i kept my v3 throwers only.

What point are you trying ti make?
Click to expand...
I notice that you have edited your post to delete this;

"If you need complete clarification, I meant I have sold all AT complete systems.. V1, V2, V3, V4. I I currently have 2 V3 throwers only..."

You said you sold all (your?) AT complete systems.. V1,V2. V3,V4 but you currently have 2 V3 throwers. Then you go on to say that you don't run ANY AT systems as sold by Adam/AT. Which one is it? You either do or you don't.

And so you know, I am not an IP hater. I currently run a V4 with an IP trickler and have a V3/IP trickler system on the way.
 
PatMiles said:
I notice that you have edited your post to delete this;

"If you need complete clarification, I meant I have sold all AT complete systems.. V1, V2, V3, V4. I I currently have 2 V3 throwers only..."

You said you sold all (your?) AT complete systems.. V1,V2. V3,V4 but you currently have 2 V3 throwers. Then you go on to say that you don't run ANY AT systems as sold by Adam/AT. Which one is it? You either do or you don't.

And so you know, I am not an IP hater. I currently run a V4 with an IP trickler and have a V3/IP trickler system on the way.
Click to expand...


You and everyone in this thread knows what I have and can see it right in the video. Ive said it over and over I have ONE PART (V3 Thrower left) with my IP SYSTEM.

That is not a AT system. That is a single AT part. An AT system would be ALL AT parts from that AT system. I dont run an AT system, I run a single AT part in an IP system.

Again im not sure what you keep trying to prove or point out, your obviously but hurt about something. Again reading seems very hard for you.
 
PatMiles said:
I notice that you have edited your post to delete this;

You said you sold all (your?) AT complete systems.. V1,V2. V3,V4 but you currently have 2 V3 throwers. Then you go on to say that you don't run ANY AT systems as sold by Adam/AT. Which one is it? You either do or you don't.
Click to expand...

Your quoting something that is exactly correct. I said I dont run any AT systems sold by Adam/AT. So you can understand what that means...

An AT V3 system sold by Adam would be his upgrade V3 Bluetooth electronics he released with V3, His trickler, his thrower, his new cup, he's new trickler bases. That would be an AT V3 system. I dont run thst and sold all of thst except the thrower.

I RUN an IP system 99% IP parts, with a V3 thrower. If that to you is a V3 AT system, then Im sorry I can't help you any further.

Now, why isnt it a AT V3 system.. because it uses IP electronics, IP trickler, IP draft shield, IP thrower and trickler mount, and IP cup..

The V3 thrower doesnt even work the same with this IP system vs Adam/ATs system. It uses different capacitors running the motor smoother and with less noise, it allows you to adjust the up and down and hold at top stroke of the thrower (AT system just rips up and down).

Is this starting to make sense to you?? Or my V3 thrower is just an " AT System" to you still???
 
So what you are saying is that a virgin V3 will NOT run in conjunction with an IP trickler.
With regards to my AT V4, it runs just fine with an IP trickler. Yes, different version AutoTrickler but it was a 2 minute plug and play effort.
 
JMayo said:
Lol this squabling is cracking me up :D .

I'm not so sure that the communication part of the trickler works with sartorius e64. The v2-4 doesn't.
I know the package with new coms will. I don't know how to get my answer from the horses mouth.
Click to expand...

I asked Paul today when you brought it up and he said his IP electronics, trickler, etc. Works on Sartarius Entris64.

Is that your question?
 
JMayo said:
Lol this squabling is cracking me up :D .

I'm not so sure that the communication part of the trickler works with sartorius e64. The v2-4 doesn't.
I know the package with new coms will. I don't know how to get my answer from the horses mouth.
Click to expand...
JMayo, I originally bought a new V3 (seems like many years ago now) Autotrickler especially for Entris64 scale. It came with specific electronics for it. A couple (maybe, can’t really remember) years ago I bought the Ingenuity trickler and added it to the V3 system. It’s just a matter of pulling the motor off the old trickler and putting it in the new one. The system doesn’t know or care what trickler it’s sending juice to. I have a complete replacement system on order from Paul, whenever that happens. Thinking about trying to get the cover and electronics NOW and then just be waiting on the dumper.

This has worked awesome by the way. I timed how long it took me to charge 150 pcs of brass the other day. Just under an hour, it took me 6 seconds to pick up the cup, dump it, put back on scale. It takes about 3 seconds once the cup is on the pan to begin throwing. I think it figured out to a 30.3 grain charge of H4895 took ~10 seconds, on average figuring everything in. This included a few times pulling out a kernel and re checking and/or a small twist to drop an extra kernel.

Long story short, the V3 with IG trickler is the best I’ve had. When IG trickler used with IG electronics, it’s even better from what I’ve seen.
 
padom said:
I asked Paul today when you brought it up and he said his IP electronics, trickler, etc. Works on Sartarius Entris64.

Is that your question?
Click to expand...
When you talked to Paul today did he give any indication or update on when he is going to start shipping?
 
LRPV said:
Long story short, the V3 with IG trickler is the best I’ve had. When IG trickler used with IG electronics, it’s even better from what I’ve seen.
Click to expand...
The entire reloading world agrees with you, sir.

I can't even comprehend how Adam failed to capitalize on that venerated combo and reintroduced it as the V5, saving everyone from waiting for a $600-$700 bulk dropper.
 
LRPV said:
JMayo, I originally bought a new V3 (seems like many years ago now) Autotrickler especially for Entris64 scale. It came with specific electronics for it. A couple (maybe, can’t really remember) years ago I bought the Ingenuity trickler and added it to the V3 system. It’s just a matter of pulling the motor off the old trickler and putting it in the new one. The system doesn’t know or care what trickler it’s sending juice to. I have a complete replacement system on order from Paul, whenever that happens. Thinking about trying to get the cover and electronics NOW and then just be waiting on the dumper.

This has worked awesome by the way. I timed how long it took me to charge 150 pcs of brass the other day. Just under an hour, it took me 6 seconds to pick up the cup, dump it, put back on scale. It takes about 3 seconds once the cup is on the pan to begin throwing. I think it figured out to a 30.3 grain charge of H4895 took ~10 seconds, on average figuring everything in. This included a few times pulling out a kernel and re checking and/or a small twist to drop an extra kernel.

Long story short, the V3 with IG trickler is the best I’ve had. When IG trickler used with IG electronics, it’s even better from what I’ve seen.
Click to expand...
Same situation with my V1 AT… Have the A 419 kit and now added the Ingenuity trickler unit that works faster and more accurately than the original style trickler unit.
Just waiting for my preorder to rise up to the top of the pile and arrive at my door…
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,226
Messages
2,213,857
Members
79,448
Latest member
tornado-technologies

Share This Page

Back
Top