• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ingenuity Precision New Trickler

Plato said:
New update (new to me; apologies if already reported):

"The current estimate for the first preorders that started 12-19-23 through about the end of 02-2024 should start going out in May. If you preordered after the end of February 2024 then you will be in the second batch of production scheduled for about July. "
Click to expand...
This is what I was told on my order also.....
 
Drewel said:
When did you order? When did you receive it??
Click to expand...
Not mine, sir, but they should be seen in the wild soon (I know, I know, we've heard that a dozen times before).

Expected to be ~ half the cost, also, so I am waiting on two of them myself.

Sorry I was a little ambiguous there...should have said my wait for the IP is over, but now waiting on two of these instead.
 
Plato said:
Not mine, sir, but they should be seen in the wild soon (I know, I know, we've heard that a dozen times before).

Expected to be ~ half the cost, also, so I am waiting on two of them myself.

Sorry I was a little ambiguous there...should have said my wait for the IP is over, but now waiting on two of these instead.
Click to expand...
What's the brand of that setup?
 
slow-smile.gif

This is a no obligation preorder. You will get an order number and when they are ready to ship your payment notification will go out in the order they were received. The current estimate for the first preorders that started 12-19-23 through about the end of 02-2024 should start going out toward the end of July/Aug 2025.
 
Plato said:
View attachment 1671352

This is a no obligation preorder. You will get an order number and when they are ready to ship your payment notification will go out in the order they were received. The current estimate for the first preorders that started 12-19-23 through about the end of 02-2024 should start going out toward the end of July/Aug 2025.
Click to expand...

We shall see what we shall see!
 
Heard this was the best. Was just getting into reloading and figured buy once cry once. Been waiting almost 2 years. Haven’t reloaded 1 round yet. I guess I need to look at another system
 
I am in the same situation as you are I am getting tired of waiting . What does a guy go with now ?
 
I opted to go with patience. I anticipate we may all have the scale we ordered inside of 12 months; Perhaps inside of 6 months. In my case I will save on components & likely load & shoot considerably less than if I had the new offering. For what I do, I am not sacrificing much by using what I currently have on hand. If you do not have a A&D 120 I or better scale yet, you may wish to upgrade your scale until Ingenuity is shipping your order.

If you truly load a lot of high volume there are a few existing options that may check most if not all of your boxes. Ask yourself, want or need right now. Patience often has its rewards. Is this one of those times? Only you can decide.
 
The only part of the IP system that isnt released yet is the IP Dumper.

Every other piece of the complete system is done and available and has been for months.

Buy your A&D Fx120/300 scale, order the IP led illuminated windscreen, IP cup, IP electronics, IP trickler and IP trickler/dumper 3D printed mount that goes on top the IP windscreen...

Now go buy a $30 Lee powder measure and mount it over the dumper hole on top the scale.. set the thrower to 1.5-2gr below your final charge weight and manually throw the lever and let the IP system do everything else. This is 90% of the final system. (Or get a AT V3 thrower and be fully automated but good luck finding one)

Ive owned every iteration of AutoTricklers and AutoThrows and AT electronics and every piece and iteration of IP hardware. Ive sold all the AT systems except the V3 throwers needed for Paul's system until his dumper releases. And the worst of them all is/was the V4. It was a nightmare and I went bsck to my full V3 AT setup until the IP trickler released. Spilled powder, didnt play nice woth certain powders, constant over throws. That thing was a fucking headache. I hear things have got a little better with shims and shit but no thanks.

If i needed something today I would buy exactly what I said above. None of the AT stuff comes close to the IP setup in time, consistency and accuracy charge after charge.

I have 2x A&D/AT V3 Throwe/IP setups and they are the best automated powder system of everything Ive owned. Hands down not even close. I load A LOT of ammo, this isnt anything biased just flat out facts.

When Paul releases his dumper, you buy just thst piece and install it on top your scale and you now have the complete system. No reason to wait to buy all the other pieces..
 
Last edited:
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,237
Messages
2,214,286
Members
79,464
Latest member
Big Fred

Share This Page

Back
Top