hobo oil

[pirate ammo]

Haven't seen an answer to the question, has anyone used it as case lube for sizing, or expanding?

Yes,works great done a review on it. Capt.Dan

 

[group therapy]

Haven't seen an answer to the question, has anyone used it as case lube for sizing, or expanding?

A few folks have said use it very sparingly and it worked great. It’s on one of the 2 threads that are running right now.

 

[dickn52]

Started off using mine with a bit of apprehension. Used a small drop on the Forster Co-ax pivot points and ram. Nice. Then I used it on a door hinge that continually squealed. Nice. But I've been bitten before on wonder oils and lubes. But four weeks in and I'm starting to believe the hype wasn't...hype. Cleaned a 1911 this morning and decided to try it on the rails and slide instead of the good old RIG grease. Smoother at this point. Firing the gun on Wednesday and will know better on how it handles the stress. I'm hopeful. I can then start cleaning out my 'lube' cabinet finally.

 

[pirate ammo]

Started off using mine with a bit of apprehension. Used a small drop on the Forster Co-ax pivot points and ram. Nice. Then I used it on a door hinge that continually squealed. Nice. But I've been bitten before on wonder oils and lubes. But four weeks in and I'm starting to believe the hype wasn't...hype. Cleaned a 1911 this morning and decided to try it on the rails and slide instead of the good old RIG grease. Smoother at this point. Firing the gun on Wednesday and will know better on how it handles the stress. I'm hopeful. I can then start cleaning out my 'lube' cabinet finally.

It will work, tested it with a FnFal 308, 3 10 round bursts 60 rounds total, it's still there.

 

[group therapy]

Started off using mine with a bit of apprehension. Used a small drop on the Forster Co-ax pivot points and ram. Nice. Then I used it on a door hinge that continually squealed. Nice. But I've been bitten before on wonder oils and lubes. But four weeks in and I'm starting to believe the hype wasn't...hype. Cleaned a 1911 this morning and decided to try it on the rails and slide instead of the good old RIG grease. Smoother at this point. Firing the gun on Wednesday and will know better on how it handles the stress. I'm hopeful. I can then start cleaning out my 'lube' cabinet finally.

 

[group therapy]

It will work, tested it with a FnFal 308, 3 10 round bursts 60 rounds total, it's still there.

 

[Dusty Stevens]

Hobo oil works on everything. Ive always soaked my ar bolts in slick 50 and ran them in kendall motor oil. The hobo oil runs them just as slick and fast and dont ruin my shirts and gunk up my glasses. Its really a remarkable product and cheap enough to just give it a try if you dont trust me.

 

[group therapy]

 

[Kracken McGraw]

GT just curious, you don’t happen to work for some big oil refinery down in Mississippi do you. I can just picture you carrying a lunchbox full of little empty bottles to work everyday. Just joking, my bolts run slick and smooth now!

 

[DukeDuke]

I like it! It reminds me of marvel mystery oil, which I use a lot.

 

[X-Caveman]

Been running it on my bolts for a few months now. Hobo on a Borden is crazy smooth.

Yesterday I almost couldn’t get my key into a deadbolt. It’s been acting up for several weeks, but I thought I was locked out this time. I finally got it open and was going to replace it, then I thought i’d try to lube it first. I took it out, laid it down with the key hole face up, and dropped in two drops of Hobo. After about 20 seconds, I tried my key. Went in no problem. , so I put it back together. I swear it almost pulls the key out of my hand now!!! And turns buttery smooth, too.

 

[group therapy]

Been running it on my bolts for a few months now. Hobo on a Borden is crazy smooth.

Yesterday I almost couldn’t get my key into a deadbolt. It’s been acting up for several weeks, but I thought I was locked out this time. I finally got it open and was going to replace it, then I thought i’d try to lube it first. I took it out, laid it down with the key hole face up, and dropped in two drops of Hobo. After about 20 seconds, I tried my key. Went in no problem. , so I put it back together. I swear it almost pulls the key out of my hand now!!! And turns buttery smooth, too.

 

[fatelvis]

Is Hobo oil safe to use on Glocks? Or will it react with the plastic? Thanks

 

[Ranger007]

Ordered some today. Gonna give it a whirl.

 

[Kermit in Va.]

It's good stuff...I think the free plastic bottle he sent me work even better than the glass 1..










Just had to do that...LOL

 

[TAJ45]

SO, yer running oil on two threads!! You may want to consider yer target demographic. Us more seasoned types (geezers) may not be able to maintain our wps, word per second, digestion of content. It be lubed so well and moving so fast.
I like the plastic bottle idea.

 

[group therapy]

GT just curious, you don’t happen to work for some big oil refinery down in Mississippi do you. I can just picture you carrying a lunchbox full of little empty bottles to work everyday. Just joking, my bolts run slick and smooth now!

Actually no I make the best dang hamburgers in our town lotsa folks here do work for chevron, but not me

 

[Ironman308]

I just jumped on the Hobo oil band wagon. My bolts run smooth as silk. Just cleaned out the Imperial Wax from my 6.5 dies and going to give a try it today on resizing my brass.

 

[Cecil S.]

Is Hobo oil safe to use on Glocks? Or will it react with the plastic? Thanks

I tried it and all is well. Worked great.