DIY stock modification/paint/finishing picture thread

[Dusty Stevens]

I did this one for customer and used Polane from Sherman Williams very durable but the stuff needs to be applied in a well ventilated area.View attachment 1361556View attachment 1361557View attachment 1361558View attachment 1361559

Can you show a pic of the sponge you used?

 

[Nathan Gravitt]

Just because I can...

bet you get all the looks at the range!!

 

[Nathan Gravitt]

Just because I can...

I showed my 6 year old and this is what she wanted me to say.
“This is Abby! I love the way you painted the stock! I like the pink and the green in the red!”

 

[Bc'z]

Riding on railsa nice manly shade of sparkly pink..
A lil smokin session..
A lil bit of apple red candy...
Some shiny stuff....
Next week its off to the pinstriper for a Dawgs logo.

 

[Carl S]

I did this one for customer and used Polane from Sherman Williams very durable but the stuff needs to be applied in a well ventilated area.View attachment 1361556View attachment 1361557View attachment 1361558View attachment 1361559

Really cool..top job.

 

[std7mag]

And here i was gonna mention that there's rumor that @Bc'z may have painted a stock ot two...

 

[Bc'z]

And here i was gonna mention that there's rumor that @Bc'z may have painted a stock ot two...

Maybe 1 or 2. lol
I just had to take it out in the sunlight

 

[std7mag]

Heck of a wind vane ya got there!!

 

[Nathan Gravitt]

Guys, feel free to post your stock or projects here. No matter how good or bad you think it is. We learn from each other. Here’s a barrel I did something different to. Sprayed the barrel kind of splotched with dark gray and light gray, let it dry, put the barrel net/sleeve over it and sprayed it in black with a few light grey spots. I think it was a decent idea but not the best execution.

 

[Bc'z]

Guys, feel free to post your stock or projects here. No matter how good or bad you think it is. We learn from each other. Here’s a barrel I did something different to. Sprayed the barrel kind of splotched with dark gray and light gray, let it dry, put the barrel net/sleeve over it and sprayed it in black with a few light grey spots. I think it was a decent idea but not the best execution.

Media blast it with net in place.

Murder candy

 

[Dusty Stevens]

How bout butchering a 40x stock to fit a vudoo repeater and then rattle can it

 

[whatwind?]

@Bc'z

Where best place to purchase sealer? Sim tech 2050?

 

[Bc'z]

Simtech 1-951-279-7010
Mike or Dave will answer the phone
28x50 easy sanding sealer is the polyester primer i use on all my stock projects wood or composite.

A word to the wise...
If you leave this product in your spray equipment because you got side tracked or forgot to clean it, buy another spray gun.

 

[joshb]

View attachment 1362873View attachment 1362876View attachment 1362875

How bout butchering a 40x stock to fit a vudoo repeater and then rattle can it

I think I might cry!

 

[Dusty Stevens]

I think I might cry!

Dont cry. Now its usable

 

[JFrank]

Media blast it with net in place.

Murder candyView attachment 1362866

This IS sweet…

 

[whatwind?]

Test pieces for the stock that was glued last week, test pieces are great practice

I used wire brush to lift the grain, wood filler dyed black to get in there and then small coat of sealer and then sanded it down and then started different stain combos

 

[whatwind?]

Other side did the same but different colors

Which one?? I like the yellow burst better

This one was gold, brown and some black

 

[joshb]

My vote:

 

[whatwind?]

Better effort on the yellow, not there yet