• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Bore cleaner

Yup, everyone has their own opinion.
There is no right answer.

I use Hoppes BR to get the fouling out.
Then I use WipeOut generously and let it sit for a few hours.
 
I have used Wipe-out/Patch-out and accelerator and thought they worked well. Then I bought a bore scope. Hard carbon was present in my bores, it took 7+ days with Carb-out soaking and lots of scrubbing with nylon brushes. I bought the Thorro-clean and was able to clean the carbon out, even the "carbon ring" in 20 min of total work time by following instruction.

Any comments on Thorro-clean products?
 
280AIDave said:
I have used Wipe-out/Patch-out and accelerator and thought they worked well. Then I bought a bore scope. Hard carbon was present in my bores, it took 7+ days with Carb-out soaking and lots of scrubbing with nylon brushes. I bought the Thorro-clean and was able to clean the carbon out, even the "carbon ring" in 20 min of total work time by following instruction.

Any comments on Thorro-clean products?
Click to expand...

Thorroclean, this stuff works!

I had some hard carbon that patch out and accelerator as well as letting patch out soak just wasn’t getting the job done. After watching Fclass John’s video I decided to try Thorroclean. Thorroclean worked well on my first rifle so I tried it on a second one. This barrel has about 400 rounds...
forum.accurateshooter.com
 
1. White vinegar. Apply to nylon brush and scrub bore repeatedly (re-applying as needed) for a few minutes to loosen things up.
2. Wrap a bit of Bounty paper towel around the brush and apply bore paste of your choice. Scrub your bore 5-10 times, remove the old paper towel, replace with new paper towel and more bore paste. Repeat til the paper towel comes out pretty clean.
3. Wet a few cotton patches with oil/CLP and wipe out anything left in your bore. Follow with a couple dry patches.
NOTHING works better. Verified repeatedly with bore camera. When you want to clean your bore to bare metal, this is the way.
What the acidic vinegar doesn’t lift out (which is most of what’s in your barrel) the bore paste gets the rest of.
 
Bore Tech C4 has been working real well for me in my 457 Varmint, especially for getting the carbon ring out of the breach. I soak for a few minutes then use my nylon brush and all is clean.

Steven
 
Last edited:
After testing most everything out there, I can say that the best bore cleaner is Breakthrough clean tech carbon pro. It even beat Bore tech. After a 10-15 minute soak followed by 20 bronze brush strokes, it removed 99% of the hard packed carbon as verified by borescope. One thing it did that nothing else did was remove what appeared to be brown rust from a neglected shotgun bore. I was shocked to see what came out of that barrel. This was after it was cleaned with Bore Tech and Riptide and clean patches were coming out and visibly clean and shiny with a borescope. In the CLP class, Bore Techs new Extreme CLP is a hard act to follow and I wish we had it during my military career. While I'm not a CLP guy, it did an impressive job IMO.
 
Butch’s, Kroil, Breakfree CLP, Slip 2000 and good old Hoppes #9 depending on the application.
 
SeabeeKen said:
yes. I've been having better results with it than bore tech I'm sad to say. Been with bore tech a long time. Testing is still ongoing. Will test their copper remover as soon as I can get some copper in the bores.
Click to expand...
I am having very good results too.....also I had some 22-250 Norma brass that had been sitting for years......the necks were totally black and the brass very oxidized.....sprayed a little waited a few minutes and to my surprise a quick twist with 0000 steel wool the brass came out like new........will still use boretech (because I have a couple of large bottles) but I just ordered another bottle of breakthrough........I am going to see what else it will clean
 
Websurfer said:
1. White vinegar. Apply to nylon brush and scrub bore repeatedly (re-applying as needed) for a few minutes to loosen things up.
2. Wrap a bit of Bounty paper towel around the brush and apply bore paste of your choice. Scrub your bore 5-10 times, remove the old paper towel, replace with new paper towel and more bore paste. Repeat til the paper towel comes out pretty clean.
3. Wet a few cotton patches with oil/CLP and wipe out anything left in your bore. Follow with a couple dry patches.
NOTHING works better. Verified repeatedly with bore camera. When you want to clean your bore to bare metal, this is the way.
What the acidic vinegar doesn’t lift out (which is most of what’s in your barrel) the bore paste gets the rest of.
Click to expand...

My wife will be happy to hear about the vinegar. She buys the stuff by the gallon. From laundry, household cleaner to weed killer. Aldi's vinegar.

Totally makes sense though. Same thing with using CLR.

I also agree NOT using the abrasive is just wasting time.
 
Many of the top shooters in the world are using wipeout and accelerator, but they brush it contrary to what the bottle says. They also use iosso as needed. Good enough for speedy, good enough for me.... doesn't seem too toxic, but maybe I should find an msds for it.
 
You must log in or register to reply here.

Similar threads

Bore cleaner search......?
Replies
7
Views
888
varmtr
Bore cleaner
2
Replies
23
Views
4,260
barkingsnake
WIPE-OUT BORE CLEANER
2
Replies
30
Views
4,341
Bill K

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,249
Messages
2,214,763
Members
79,495
Latest member
panam

Share This Page

Back
Top