• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Bedding

liveround

I have a .338 Baer in an HS Precision stock that is Devcon bedded. I was contemplating replacing the stock with a Bobby Hart, but it comes with aluminum bedding built in. Is one bedding any better than the other? If the Devcon is better, would I just take out the aluminum bedding and replace it with the Devcon? I looked at a few YouTube videos for Devcon bedding and it didn't look too tough......


Thanks!
 
So, in your opinion, is the aluminum bedding fine by itself? Or leave it in and put Devcon over it? Sorry for the newbie questions....
 
http://erniethegunsmith.com/catalog/c41_p1.html
Have a look see at No. 1, No. 2, and No. 3 under “Gunsmithing Odds and Ends” for why anybody’s stock with an aluminum bedding block is still likely to benefit from having been bedded to an individual action.
 
Leave those Aluminum block on and just add devcon for perfect work.

This method know as skim bedding. Most gunsmith also offer this service with half price from full pillar bedding.
 
I have shot stocks with aluminum bedding blocks, then bedded them, and they shot much better after being bedded. People are saying to do skim bedding, but I gouge out channels in the aluminum with a Dremel tool, and leave only the portion of the aluminum that is right around the action screws, so the height of the action remains the same; also, that is tantamount to having pillars. I gouge out the recoil lug a bunch, on top and front. I think the irregular surface of the gouging process gives better grip for the bedding compound. Watch the youtube vids on bedding, but I would recommend doing a basic wood stock as your first bedding job, so as not to mess up something more expensive.
 
I have a question about "Devcon Steel 10110" and aluminum bedding blocks.

Does the 10110 actually have a metal in it's compound, or does it get it's name from it's strength?

If it does have a metal of some kind in the compound, would this cause a dissimilar metal reaction with the aluminum?
 
I'm spending a shit load of money on my first custom rifle and I'm going to bed it myself. I do not need any regrets.
 
Eraser said:
I'm spending a shit load of money on my first custom rifle and I'm going to bed it myself. I do not need any regrets.
Click to expand...
Practice, practice, and practice. We all didn't get it perfect the first time. If its a shit load of cash on a custom.....practice first. Trust me on this one.
 
I may not have been clear, sorry. This was my question.


"I have a question about "Devcon Steel 10110" and aluminum bedding blocks.
Does the 10110 actually have a metal in it's compound, or does it get it's name from it's strength?
If it does have a metal of some kind in the compound, would this cause a dissimilar metal reaction with the aluminum"?

The post about the "shit load of money and having regrets" has to do with the Devcon and the aluminum bedding block possibly reacting against each other.
This would cause me some regrets, and be a waste of some money.
 
Eraser said:
I may not have been clear, sorry. This was my question.


"I have a question about "Devcon Steel 10110" and aluminum bedding blocks.
Does the 10110 actually have a metal in it's compound, or does it get it's name from it's strength?
If it does have a metal of some kind in the compound, would this cause a dissimilar metal reaction with the aluminum"?

The post about the "shit load of money and having regrets" has to do with the Devcon and the aluminum bedding block possibly reacting against each other.
This would cause me some regrets, and be a waste of some money.
Click to expand...

http://www.devcon.com/products/products.cfm?familyid=101


I think you would be OK using devcon. The use of devcon to bed all aluminum actions like the panda are quite common and I've never heard of an issue like your concerns.

The link above is to devcons website, it may be helpful answering some of your questions about the contents of 10110.
 
WillyTP said:
Eraser said:
I may not have been clear, sorry. This was my question.
Click to expand...

http://www.devcon.com/products/products.cfm?familyid=101


I think you would be OK using devcon. The use of devcon to bed all aluminum actions like the panda are quite common and I've never heard of an issue like your concerns.

The link above is to devcons website, it may be helpful answering some of your questions about the contents of 10110.
Click to expand...

Thanks for that info. I called Devcons tech support before I posted. (five days ago) I'm guessing my inquiry on the matter does not deserve a reply.
 
You must log in or register to reply here.

Similar threads

Re-bedding a stock
Replies
3
Views
1,238
rcol317
Caleb85
Bedding question
Replies
7
Views
635
Raythemanroe
long40shot
Just bought a new HS stock....
Replies
5
Views
1,280
long40shot
long40shot

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
167,132
Messages
2,227,746
Members
80,235
Latest member
pelicanarms

Share This Page

Back
Top