Barrel vise

[HillbillySniper]

Anyone near the Pittsburgh Pa area have a barrel vise and a Rem action wrench willing to spin a factory barrel off for me? I throw you a couple bucks for your time. Pm me if you do or know some who does


Thanks

 

[HillbillySniper]

Anyone?

 

[timeout]

Wisconsin here. If you want to take a trip to the Badger state, I'll do it for you. Probably cheaper though to get ahold of pbike on here and buy a vise and wrench from him!

 

[WVHick]

I'm in Morgantown, WV. I'd do it.

 

[hogpatrol]

Sure thing. Bring it on over.

 

[HillbillySniper]

Everyone’s so far away. Guess it’s time to buy some new pipe wrench’s. What’s the worse that’ll happen? Hahahaha

 

[rwk]

Everyone’s so far away. Guess it’s time to buy some new pipe wrench’s. What’s the worse that’ll happen? Hahahaha

Buy the daMN THING.

 

[Dgd6mm]

Sure thing. Bring it on over. View attachment 1051506

That looks like it's definitely worth a couple bucks.

 

[R.Morehouse]

PM sent

 

[Chief 101]

Everyone’s so far away. Guess it’s time to buy some new pipe wrench’s. What’s the worse that’ll happen? Hahahaha

'what could go wrong'

 

[ROCKJAG4]

Anyone near the Pittsburgh Pa area have a barrel vise and a Rem action wrench willing to spin a factory barrel off for me? I throw you a couple bucks for your time. Pm me if you do or know some who does


Thanks

LAKE ARIEL, PA.I'LL REMOVE IT IF U WANT TO SHIP. OR IF BY CHANCE U GET UP THIS WAY. NO-CHARGE.

 

[snert]

Economy Gunsmithing, Big Sewickley Creek rd, near Economy Boro. He would do it, but would charge you

 

[Uthink Uknow]

http://forum.accurateshooter.com/th...nches-barrel-vises-dies-etc-for-sale.3923651/

 

[gambleone]

Economy Gunsmithing, Big Sewickley Creek rd, near Economy Boro. He would do it, but would charge you

You might want to call first. They usually want you to leave it there. Never saw them do
anything while you wait.

 

[dsculley]

Buy the barrel vise. If you replace one barrel now, you will want to replace more in the future. I find good tools to always be a good investment.

 

[madmixerman]

Good luck removing a Remington factory barrel. I hear they can be very hard to remove the factory installed barrel.

 

[joshb]

My 2 cents: Buy a good 4 bolt vise and an action wrench. It opens up a whole new world! Just take a deep breath and hit the Buy button. Take out a second mortgage and start buying actions and barrels. Adopt a good Gunsmith 'cause he's going to feel like a member of your family soon enough, anyway. You'll soon find out that Remington's are "easy" and Tikkas are the real toughies. I use two vises on them.

 

[alinwa]

If you DO consider buying the wrench/vise then the important one is your choice of wrench..... get this one from Brownell's

https://www.brownells.com/gunsmith-...n-700-rifle-action-wrench-head-prod25119.aspx

about 300.00 for this wrench and a barrel vise of some sort but this wrench will EASILY remove any Rem 700 barrel.

300.00 is 300.00 but if you have to drive very far....... and especially if you have to make 2 trips......

 

[Comrade Terry]

Good luck removing a Remington factory barrel. I hear they can be very hard to remove the factory installed barrel.

He'll need at least a four foot pipe for a 'helper'.

 

[hogpatrol]

He'll need at least a four foot pipe for a 'helper'.

For a Remington barrel, a smoke wrench and a pipe wrench would suffice.