Anyone reloading 10mm

[spaniel]

Longshot is the velocity winner, I load more 10mm than anything and load it full power with 200s. I use powder coated Missouri Bullets, the powder coat survives the rifling so it doesn't lead the barrel.

 

[41rem]

The biggest tip I can offer...

It is a 10mm Auto. Not a 41 Mag auto. 180s and 200s seem to be the sweet spot for pressure, velocity and accuracy.

I'm going to try & remember that.

Have my die set as of today, have my 1x brass all polished up will start with brass inspection, resizing, primer pocket clean & bell case mouth. I'm waiting on some MBW WFP-PB that's the 200 gr black coated gas checked lead in .401".

Going to have & dig thru my large pistol primer stash and see what I have

 

[Hoser]

Let me know how those 200s work out.

I wish they made the 220s in a coated flavor.

 

[41rem]

Let me know how those 200s work out.

I wish they made the 220s in a coated flavor.

Will do, I'm going to run them up to 1150 fps. That's were I have the heat treated 200 WFN-GC that I carry in the woods.

This coated bullet will be the more affordable practice rounds. I'll check for leading but the way these are set up highly doubt I'll see any

41

 

[41rem]

Loaded up 50 of the above mentioned loads yesterday will run over the chronograph when I get back from AZ. Curious if the coated bullet will be faster than the naked lead with the same powder charge?