• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

7mmWSM barrell specs???

I need opinions and suggestions on which barrel is working best for the 7mmWSM, re; length, twist, type of rifling, even manufacturer.It will be used as a F/TR class to 1000yds.
Thanks,
Buzzsaw
 
Buzzsaw,

Only .308 Winchester and .223 Remington chambers are allowed in the F/TR class. A 7mm WSM would have to compete in F-Class Open. Before you spend money on an F-Class rifle please read and understand the NRA HP rule book, Section 22. Either way you go, you’ll enjoy the heck out of F-Class.

Larry Bartholome
 
Buzz

Are you still going to build your 7WSM? I'd spec it this way for a pure F-Class barrel:

Long throated to at least 3.00" with the 175 smk or 180 Berger 180s;
30" finished length,my research shows little gain in velocity combined with a reduction in pressure beyond 30");
9 twist,will stabilize the heavy high BC 7mm pills: 175 smk, Berger 180) even if you load down to 2,800 fps at low altitude);
Contour I think is sort of up to you. Lighter or fluted if you need to make weight, heavier if weight is not an issue,I like a MTU as the minimum and the 1,000 yard contour for the optimum, but she is a heavier sucker)

JeffVN
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
169,804
Messages
2,281,984
Members
82,314
Latest member
LDR
Back
Top