Intell
Silver $$ Contributor
It may be a cone breach gun without extractor cuts.Now you say you took the barreled action out of the stock Right?
No problems then.
It may be a cone breach gun without extractor cuts.Now you say you took the barreled action out of the stock Right?
No problems then.
Take your rifle to a competent gunsmith before you start pounding with cleaning rods, rubber mallets or anything. The best would be taking it to who built it etc.Really need some help. I was shooting my 2500x action rifle and after the shot the bolt wouldnt open. I took the barrel off and the trigger and it still wouldnt budge. Ive managed to get the bolt out far enough that I see the casing is stuck in the bolt face. Cant understand why the bolt will not come out. Any help would really be appreciated. Thanks.
TrueIt may be a cone breach gun without extractor cuts.
Now you say you took the barreled action out of the stock Right?
No problems then.
Good move.Thanks for all the advise and help. I did what several suggested and got in touch with Jerry Stiller. Im going to send it to him. Thanks again.