Anyone recognize this Anschutz action?

[grauhanen]

Yes Glen, 3mm cup head screw. The one with the adhesive adjacent is a 4-40 screw that prevents setscrew from backing out, shot one of these back in the 90’s.

No 4-40 screw is used. Anschutz has a screw M3X5 (3mm X 5mm) and what it calls a "threaded pin" M6X6 (6mm X 6mm).

 

[TRSR8]

No 4-40 screw is used. Anschutz has a screw M3X5 (3mm X 5mm) and what it calls a "threaded pin" M6X6 (6mm X 6mm).

Well the master tool and die maker that EDM’d mine out after the head snapped and then re tapped it must have been wrong.
Jesus, what’s in the water up there ?

 

[Williwaw]

We're not sure but it bears investigation.

 

[TRSR8]

We're not sure but it bears investigation.

I got one of the first 10-12 barreled 2007 actions to hit USA, before they were offered as full rifles. Those were what was screwed into mine.
Was unclear the set screw adjacent to the barrel index screw was glued…….until I snapped it off, became rather well versed on exactly what it was.