• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ingenuity Precision production unit overview

F Class John

F Class John

NRA Life Member
Gold $$ Contributor
Here's a look at what the production unit of the IP System will look like and I show a bunch of different powders running through it including ball, extruded and N570. He told me last night he's on track to ship at least some of the first orders by end of August.
 
Is the app available yet? Or when the unit is released in August? Can’t wait to get mine with the entris II - definitely will be worth the wait.
 
Excellent video, thanks!!!

Watching the video I didn't see anything about the scale settings. Does this assume your scale is set to factory default settings? Because that's not grains for A&D, so kinda wondering if there's some instructions for setting the scale (kinda like for the ST) or what to expect.
 
Last edited:
I was just headed over to ask if anyone else had seen this on YouTube lol.

I like the fact it can use more than one scale. That is imo the drawback of the v4 and why I'll be looking at this unit more seriously! Very nice breakdown John! Thanks for the video!

Kris
 
  • Like
Reactions: jxb
jxb said:
Excellent video, thanks!!!

Watching the video I didn't see anything about the scale settings. Does this assume your scale is set to factory default settings? Because that's not grains for A&D, so kinda wondering if there's some instructions for setting the scale (kinda like for the ST) or what to expect.
Click to expand...
In all my use so far, it reconfigures the scale depending on which one you have. Even if you don't have it on default settings. I've literally plugged it into two different Sartorius and 3 A&D plus a Creedmoor and never once had to do anything other than just choose the correct scale in the settings. Poof, it does the rest.
 
jxb said:
That's pretty sweet. Finally someone does it as it should be, via their sw and the interface and not force the user to figure out the scale.
Click to expand...
I was thinking about it and realized I may have misread your question. The scale will have to be manually programed the first time, there's no way around that BUT if you're coming off an AutoTrickler it's the same setting, SuperTrickler you'll have to reset and reprogram. I thought you meant when switching between scales that are already ready to go. Sorry for any confusion.
 
F Class John said:
I was thinking about it and realized I may have misread your question. The scale will have to be manually programed the first time, there's no way around that BUT if you're coming off an AutoTrickler it's the same setting, SuperTrickler you'll have to reset and reprogram. I thought you meant when switching between scales that are already ready to go. Sorry for any confusion.
Click to expand...
Not a problem. good to know. I was a little surprised that at least a factory reset wasn't needed. Appears it will be plus some settings. It's easy enough to do.
 
Still trying my best to patiently wait for this.

Will there be anything that might assist with something more tedious like ladder test loading?
 
What are we talking about for price point on this trickler?

I’m trying to see any advantages this might have when coupled with my scale over throwing charges 0.1gr light on a RCBS Chargemaster then finishing off with a normal trickler on my scale. Of course price point will be one of the major determining factors since I already have 2 Chargemasters I can have throwing charges at the same time.
 
Ledd Slinger said:
Thanks. Not as horribly priced as I thought it would be. Unless you have the Sartorious.
Click to expand...
I finally bit the bullet and got the Sartorious with the new system I have the original gold trickler and it's been working great with FX120 V3 but that's going to be my backup/range setup when I get the new one....can't wait.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,513
Messages
2,197,730
Members
78,961
Latest member
Nicklm

Share This Page

Back
Top