• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

30br bullet options

Kevin1990

So I am gathering parts for a 30br. I built a 6br last year, and then ran around for months looking for reloading components like an idiot. I want to avoid that with this build.

I am on a waitlist for barts 112s and BIB 118s

I posted in the want to buy section and was surprised at some of the responses.

From the sounds of it, the jackets are the problem. So while I wait. I'm just curious what other bullets people have had success with? I talked to hottenstein and he's 3 weeks out, so I might go that route. Any other suggestions? Barrel is going to be a a 1-17 twist, zero freebore.


Thanks fellas
 
I have heard Speer 125s will work. Maybe they were 110s. My memory sucks! Sorry!
125s in stock at “Precision Reloading”. I’ve never bought from them so be careful! Use the search thingy here for reviews and more good info.IMG_0145.jpegIMG_0144.jpegIMG_0147.pngIMG_0146.png
 
Last edited:
joshb said:
I have heard Speer 125s will work. Maybe they were 110s. My memory sucks! Sorry!
Click to expand...
The 125 gr. TNT does well for a factory bullet. Jcline here on the site makes some great bullets. I think he is doing 112 118 and 125 gr. as well. My 700 BR 1 - 17 Tw. has shot my record group ( .010 ) so far with Bibs 118 gr. Danzac coated bullets with 34.2 gr. H-4198 @ .012 jam.
 

Attachments

  • 20220509_132214.jpg
    20220509_132214.jpg
    374.6 KB · Views: 43
Bill Norris said:
The 125 gr. TNT does well for a factory bullet. Jcline here on the site makes some great bullets as well. I think he is doing 112 118 and 125 gr. as well. My 700 BR 1 - 17 Tw. has shot my record group ( .010 ) so far with Bibs 118 gr. Danzac coated bullets with 34.2 gr. H-4198 @ .012 jam.
Click to expand...
Great shooting! I'll look into jcline
 
jimmymac said:
Those 125’s from Speer will eventually leave you wanting for more IMO. Decent bullet. Won’t group for me like I want. I use them for fire forming.
Click to expand...
Yea I agree JImmy. Good for blowing out brass and practice but probably won't win a match for you.
 
jimmymac said:
Those 125’s from Speer will eventually leave you wanting for more IMO. Decent bullet. Won’t group for me like I want. I use them for fire forming.
Click to expand...
I've had them that shot as well as anything in the bbl I was using them in but I have a newish lot now that is just decent at best, in this bbl. I do like the price though and ime, they're worth trying if you can find them. Like you said too, if nothing else, their cheap and will be fine for fire forming no matter how they shoot in your bbl.
 
Kevin1990 said:
So I am gathering parts for a 30br. I built a 6br last year, and then ran around for months looking for reloading components like an idiot. I want to avoid that with this build.

I am on a waitlist for barts 112s and BIB 118s

I posted in the want to buy section and was surprised at some of the responses.

From the sounds of it, the jackets are the problem. So while I wait. I'm just curious what other bullets people have had success with? I talked to hottenstein and he's 3 weeks out, so I might go that route. Any other suggestions? Barrel is going to be a a 1-17 twist, zero freebore.


Thanks fellas
Click to expand...
I'll have to check my inventory but if you get ready before you have bullets, I may be able to get you some good bullets. Probably 116 or 118gr Hillbilly bullets. They're excellent, I just have to look at what I have first.

The Ammerman bullets mentioned above may well be worth trying too. I've got some to test but I haven't shot any of them just yet.
 
gunsandgunsmithing said:
I'll have to check my inventory but if you get ready before you have bullets, I may be able to get you some good bullets. Probably 116 or 118gr Hillbilly bullets. They're excellent, I just have to look at what I have first.

The Ammerman bullets mentioned above may well be worth trying too. I've got some to test but I haven't shot any of them just yet.
Click to expand...
Thanks alot. I appriciate it. I honestly had no idea that this many people where making custom, bullets.
 
You might try Jamie Eazor at Eazor Precision. He makes a 118 grain on 1" jackets that's quite good. I was on Randy's wait list one year and tried the Eazor's instead. They're about a 9 ogive vs. Robinette's 10 but I never saw a difference on target or scores over the year.

epsbullets.com

Eazor Precision Shooting- E.P.S Bullets

eazorprecision@gmail.com FFL & SOT 2 Transfers Available Call to Arrange Call or email for purchases 814-590-4383 Fiber Laser se
epsbullets.com epsbullets.com
 
Dave Berg said:
You might try Jamie Eazor at Eazor Precision. He makes a 118 grain on 1" jackets that's quite good. I was on Randy's wait list one year and tried the Eazor's instead. They're about a 9 ogive vs. Robinette's 10 but I never saw a difference on target or scores over the year.

epsbullets.com

Eazor Precision Shooting- E.P.S Bullets

eazorprecision@gmail.com FFL & SOT 2 Transfers Available Call to Arrange Call or email for purchases 814-590-4383 Fiber Laser se
epsbullets.com epsbullets.com
Click to expand...
Yes, James makes a great bullet also.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,902
Messages
2,206,077
Members
79,207
Latest member
bbkersch

Share This Page

Back
Top