New Upgrade for the V3 AutoTrickler

[NiteQwill]

Any idea on delivery times for those who put down deposits?

Same question. Any idea given the June/July pre-order date schedule?

 

[piie]

Anyone use this with CFE Pistol?

 

[The boogalorian]

Finally received mine today. Awesome piece of hardware. Worth the wait.

 

[BP1]

https://imgur.com/a/qdHsn84

Made by Ingenuity Precision… uses the V3 motor and cable which drives a disc that throws exactly one kernel of powder every few degrees of rotation. Quicker and more precise than a tube trickler IMO. I average about 6-9s per charge. (Works with V1 and 2 as well).

Ingenuity Powder Meter, V1,V2,V3, upgrade

ingenuityprecision.com

Yup ordered one about 3weeks ago

 

[dgeesaman]

Finally received mine today. Awesome piece of hardware. Worth the wait.

Agreed. Would buy more trickler wheels if they were available.

I like that mine tends to trickle a kernel or two low (Entris is a slower responding scale) and this trickler makes it pretty easy to click forward a kernel at a time.

 

[The boogalorian]

I found that a takedown pin retaining spring from an ar15 works to apply pressure to the ball as shown in fclass John's video.

 

[Gabe22BR]

I found that a takedown pin retaining spring from an ar15 works to apply pressure to the ball as shown in fclass John's video.

Found it to jam more often w/ spring tension..
Don’t do it-

You’ll thank me later …

 

[Tpb10505]

Found it to jam more often w/ spring tension..
Don’t do it-

You’ll thank me later …

I used a spring similar to John’s and I haven’t had any issues with jamming. I like the “click” from having the spring pressure when I just need one kernel

 

[MikeMcCasland]

Anyone having issues with binding or jamming in a default configuration? I was loading RL16 with the standard disk, and had it bind up a few times. It required you to use the thumb screw to reverse direction, and then it would continue dispensing.

 

[ryanjay11]

Anyone having issues with binding or jamming in a default configuration? I was loading RL16 with the standard disk, and had it bind up a few times. It required you to use the thumb screw to reverse direction, and then it would continue dispensing.

You have the reversible pick up by the dispenser tube backwards. I did the same thing this evening when I switched plates to go from H4895 to N150. As soon as I flipped it back around, I was back in business.

 

[dgeesaman]

You have the reversible pick up by the dispenser tube backwards. I did the same thing this evening when I switched plates to go from H4895 to N150. As soon as I flipped it back around, I was back in business.

I need to check on this but I only have the issue when I’m dispensing powder that’s not on “the list”. So I think it’s extra kernels hanging in the plate pockets and jamming. I’d like more plates to be able to dispense more kinds of powder without it jamming.

 

[MikeMcCasland]

I need to check on this but I only have the issue when I’m dispensing powder that’s not on “the list”. So I think it’s extra kernels hanging in the plate pockets and jamming. I’d like more plates to be able to dispense more kinds of powder without it jamming.

Yeah. I tested reversing it before I went to bed last night.

He is correct , it will immediately jam/bind if you have it reversed.

In my case I had the wrong disk installed for the powder I was trickling. It probably bound up ~15 times out of 100 charges, but otherwise it worked perfectly.

I had assumed there wasn't that much of a difference between the RL16 & Varget stick profile to really matter, but that doesn't seem to be the case.

 

[dgeesaman]

I’ve been running IMR 4198 which has long thin kernels and it does jam sometimes. But I have no particular complaint since it’s not one of the supported powders.