• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

New Upgrade for the V3 AutoTrickler

I don't own the auto throw, but v1 and 3 I think. This looks to replace the one thing I have been able to wear out. I'll probably get one after I get home from vacation. It looks to be an upgrade on the occasional over charge too.

Tom
 
I could not agree more, what I fail to understand is why anyone on this forum or any other forum for that matter gives one iota of a F@&# how I chose to spend MY money, on any product. They are not my banker, wife, or father. I would think in these challenging economic times that we would all stand behind any business started and manufactured here in the US rather than trash talk them....sure is not helpful to the local economies and the general demeanor of this forum which is supposed to be a venue to offer informative exchange to further the sport.

Amen!
 
It looks nice for sure. I have a V3 and I added a dandy trickler last year. I can drop 1 kernel at a time after the auto trickler shuts off. I just set it 2 tenths under what I want and use the dandy for final drop,,,you get good at it.
 
Your point?
Ok, first it has ball bearings through out, all aluminum, easy to load, easier to empty. No wires to unplug on the older V1-V3 models.
As long as the supplied angle is maintained- mounting options are unlimited…
No more wondering if powder kernels are jamemed up, of powder getting between wore out squeaky bronze bushings& & grooved aluminum straw..start to gall
Time wise it’s quicker than my old V3, and it wasn’t a slouch.!! Programming helped there on the scale itself..
The thin stretched long O-ring that had burnt spots on it, or stretched, or dry rotten, has been replaced by a short, neoprene one, that fills up the pulley grooves..
- less mess
-Doesn’t need to filled up like the old RCBS type to pick up powder… it’ll carry every single kernel to the cup..

There it is…
 
Ok, first it has ball bearings through out, all aluminum, easy to load, easier to empty. No wires to unplug on the older V1-V3 models.
As long as the supplied angle is maintained- mounting options are unlimited…
No more wondering if powder kernels are jamemed up, of powder getting between wore out squeaky bronze bushings& & grooved aluminum straw..start to gall
Time wise it’s quicker than my old V3, and it wasn’t a slouch.!! Programming helped there on the scale itself..
The thin stretched long O-ring that had burnt spots on it, or stretched, or dry rotten, has been replaced by a short, neoprene one, that fills up the pulley grooves..
- less mess
-Doesn’t need to filled up like the old RCBS type to pick up powder… it’ll carry every single kernel to the cup..

There it is…
Curious as to “Programming helped there on the scale itself..”??
 
What all came with it? Do you get all the powder disks currently available for it as I do see any option to request disks for it. I'm still on the fence about one...
Yes, as I’m using RL15, & 203 B. With the no problems…
It picks up every single Kernel!!!,
There’s-No need to fill it 1/3 way up, before it starts to trickle like the RCBS type..
 
Is the manufacturer of this unit a member on here? Ingenuity precision. I can’t seem to get an email response.

{edit}he emailed me…..
 
Last edited:
I’ve loaded-
RL 15, RL 16, RL 17
N135, N 133, N 140, N120
LT 30, LT 32
AA 2520, AA 2230
WW 748
AA 9, AA5, AA7
IMR 4350, 4320,4064,3031,4198,4227
Most all the Hogden powders …
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,589
Messages
2,199,416
Members
79,005
Latest member
iceqube74
Back
Top