Best 10/22 trigger without breaking the bank

[SGT G]

So I have a 10/22 with a Kidd barrel, in a titan stock. Looking for ideas on a upgraded trigger for my rifle.

I looked at the kids triggers, but I’m curious if there are any comparable triggers for a bit cheaper?

 

[snowpro440]

There's a couple videos on line about making your stock trigger group better if you wanted to go that route . I did mine by reshaping the sear angle with a dremmel and polishing everything up. Changing the angle is critical cause if you go too far you will need a new hammer, so go slow. This change will lighten the trigger pull to 2.5# or so. There's also a hammer, sear replacement from aftermkt mfgs.

 

[DOGCAPPER]

Kidd has a kit for trigger upgrade. I put one in and the weight, slack, and break suit me better than a well known full replacement.
Cost like 85$ took maybe 20 min. to install.

 

[SGT G]

Kidd has a kit for trigger upgrade. I put one in and the weight, slack, and break suit me better than a well known full replacement.
Cost like 85$ took maybe 20 min. to install.

I will check this out! I guess I was only looking at their full replacement kits

 

[Nowhere Man]

Valquatsen VC10TH does a decent job of reducing trigger weight and smoothness of pull. I have used it for CMP competition.

 

[SGT G]

Valquatsen VC10TH does a decent job of reducing trigger weight and smoothness of pull. I have used it for CMP competition.

https://volquartsen.com/inventory_configurations/817

This ?

 

[BeefyT11]

Consider brimstone gunsmithing... they make the stock trigger group fantastic

 

[ebb]

If you had ever pulled one you would pay for the Kidd.

 

[AJC]

I have a kidd and my dad got the vart. Both are nice I like my Kidd better.

 

[Nowhere Man]

https://volquartsen.com/inventory_configurations/817

This ?

Yes.

 

[Cluster296]

Kidd drop in is worth the money.

 

[MarkS]

So I have a 10/22 with a Kidd barrel, in a titan stock. Looking for ideas on a upgraded trigger for my rifle.

I looked at the kids triggers, but I’m curious if there are any comparable triggers for a bit cheaper?

There is no comparable trigger, to the Kidd 2 stage, it is the best 10-22 trigger IMO. I went thru this myself. Any money you put into something else could go into a Kidd.

Mark

 

[Joe Maisto]

If you had ever pulled one you would pay for the Kidd.

For sure. I put one on my 10/22 squirrel shooter with a thumbhole stock and 1x4 scope. For me it is all I could ask for with Eley 10x. Please note: I had to upgrade to another Eley brand for ejection purposes. They make one for semi-auto firearms with a tad more power and still acurate.

 

[garandman]

Scopes and triggers.... don't try to save money. Ya end up wasting money. Ax me how I know this....

 

[Cluster296]

For sure. I put one on my 10/22 squirrel shooter with a thumbhole stock and 1x4 scope. For me it is all I could ask for with Eley 10x. Please note: I had to upgrade to another Eley brand for ejection purposes. They make one for semi-auto firearms with a tad more power and still acurate.

I'm using the Kidd guide rod and light spring. I have had no cycling issues with any rounds I've tested.

 

[ebb]

I put mine on a thumbhole stocked , long barreled gun also. The stove pipe and jamming issues were fixed before the trigger was added. I don't remember whose I used but a new extractor with the match chamber made all my issues go away. The new extractor had a hook that was bent further back. After installing I thought all the gurus on the net may be right to just bend the stock extractor around some it should work.

 

[holstil]

Imo, there is no other trigger for the 10/22.
Nothing else comes close!

 

[NorCalMikie]

Be REAL careful if you modify the stock trigger. Do it wrong and you won't need a "bump Stock".

 

[Dgd6mm]

No other trigger better than the Kidd.

 

[SGT G]

Be REAL careful if you modify the stock trigger. Do it wrong and you won't need a "bump Stock".

Hahaha good to know!