• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Vortex Golden Eagle parallax ?

I have to readjust my parallax after each shoot on my F-TR .308 rifle. When I shoot everything goes fuzzy. I adjust the parallax to get a sharp image and shoot and everything goes fuzzy again. Is this normal?
 
I have to readjust my parallax after each shoot on my F-TR .308 rifle. When I shoot everything goes fuzzy. I adjust the parallax to get a sharp image and shoot and everything goes fuzzy again. Is this normal?
Might be Barrel heat, try a mirage shield or fold an old target over the barrel like a tent and see if there's a difference.
 
Not with mine. Two of my shooting buddies that bought theirs before I did haven't mentioned anything like this to me and we shoot together all the time.
 
no happens on first shoot and I have mirage shield.
Interesting '
no happens on first shoot and I have mirage shield.
I've had this problem during longer strings of firing but not on first shots. That's an expensive scope I've seen several people using them without this comment or at least they are not saying anything. Might be time to make a call to Vortex. I hate scope problems hopefully you'll get it figured out or replaced.
Good luck
J
 
I've never had that issue with the GE. My side focus on a Gen 1 Razor stopped working once when I moved it to a different gun. I had torqued the rings to 26 inch pounds thinking that wasn't to much. Vortex said 18inch lbs when I called them for repair info. After retorqueing it worked fine again. It did seem funny to me that so little difference made it not work. I've never encountered that before with other scopes.
 
Is your parallax very easy to adjust? Sounds like the friction that keeps the parallax set has come loose. alternatively, is infinity on the knob still correspond to infinity? Either way, likely a loose setscrew in the works somewhere. Vortex should turn it around quickly.
 
I have to readjust my parallax after each shoot on my F-TR .308 rifle. When I shoot everything goes fuzzy. I adjust the parallax to get a sharp image and shoot and everything goes fuzzy again. Is this normal?

Absolutely not normal. If you've ever fired another rifle with a different scope you already knew the answer to your question.

Call vortex. They'll have a new scope on your doorstep within a week. If you bought it locally, you can go to the local dealer and have them contact Vortex. Many times Vortex will credit the dealer the retail value to give you a new one off the shelf if they have it in stock. Asking us about an obvious issue with the scope is just wasting time. Call Vortex and spend this time on the range with a new properly functioning optic ;)
 
Last edited:
Mine started doing this last summer, and then failed completely. I would contact Vortex right away.
 
Excellent news,glad you got it figured out and their customer service did not disappoint.
 
Last edited:
300 yards going to work on my seating depth. It was going good till the mirage got so bad I was under 20X to see the rings.
 

Attachments

  • 20180602_094925-1.jpg
    20180602_094925-1.jpg
    172.8 KB · Views: 104

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,238
Messages
2,214,198
Members
79,464
Latest member
Big Fred
Back
Top