• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Help value my pre-64 Winchester M70 Featherweight .270

BigBamBoo

Silver $$ Contributor
Hi folks.
I have a pre-64 Winchester Model 70 Featherweight in .270 that needs a new home.
This was passed down to me from my Dad years ago and was purchased by him new in 1958.

He never really shot it or used it. He was a 30-06 guy and I have his handmade...by him...06 that is one of my "never get rid of" rifles.

Over the years, I have shot this rifle exactly THREE TIMES and less then 40 rounds.
My Dad said he shot it maybe 150-200 rounds total. So less then 300 rounds through it for sure.

Overall cond. is good with some safe rash and minor dings/scuffs on the stock.

Ser. # is in the high 42,XXXX which from what I can find puts it made in 1957. Which makes since for the date of purchase by my pops.

I have no clue what to ask on this rig. So I am looking for some help on what to price it at.

It has an old trusty Redfield 4X scope and Weaver rings.

Thanks for the help.









 
Just my sentimental musings - but you may well deeply regret selling a rifle that was your fathers. My suggestion is go on and sell your wife’s wedding band and keep the rifle....just saying. I’m told they are easier to replace than a pre64 270.

Nice rifle!
 
I have a few other rifles that my pop gave me that fall into the “keep forever” category.
He was a hobby gunsmith and built some very nice hunting rigs including the stocks. Wood sourced from walnut trees when the punched the Hwy through Chico CA.

This rig just does nothing for me, so it’s time for a new home.

$500 seems low. The ones I see in gunbroker are going for a bit more then that. So I think I will list it there.
 
R 3. Winchester Model 70 Featherweight. Serial # 573682. .30-06 caliber bolt action rifle made in 1963. 22" barrel with a bore that should clean to excellent. The original finish on the metal is in good condition with some areas of wear and rust spots on the barrel, wear on the bolt handle, and wear on the floor plate. The checkered walnut stock is in good condition with dings and scratches. The border of the checkering has been recut. Butt plate has been replaced with a recoil pad. Stock was not cut. Original sights including the front hood. Original sling swivels. Action works fine. Includes a Lyman All American 4X power scope in Weaver flip mounts. (C&R) Sold For 625.00

R 4. Winchester Model 70 Featherweight. Serial # 387456. .243 Win. caliber bolt action rifle made in 1956. 22" barrel with a bore that should clean to excellent. The original finish on the metal is in good condition with some scratches and rust spots at the muzzle and wear on the floor plate. The checkered walnut stock is in good to very good condition with a few dings and scratches. Extra finish has been applied. Aluminum butt plate. Original sights including the front hood. Original sling swivels. Action works fine. (C&R) Sold For 725.00
 
I sold a standard Model 70 in .270 with a Redfield 3-9 last summer for $1100.00. The featherweight should bring a little more in my opinion.
Wyomike
 
I bought a similar condition and vintage M70 two years ago for $500. it was also a .270.

MQ1
 
Don’t sell it. It was your dads, and if it were my rifle from my pops it’s worth a lot more to me than 725 bucks.

I feel like as soon as you sell that rifle, you’ll instantly regret it. I would put a price tag on it for 10 grand in sentimental value alone.
 
jdh47 said:
I would keep it but if you are bent on selling it you should get it appraised by a Winchester collector. It isn't a pristine specimen but they go pretty pricey at gun shows around here.

Joe
Click to expand...

+1 if you had to sell it, I would list it at a gun show. You would probably get top dollar for sentimental guys remembering their deer hunting days in the 60s as kids. But don’t sell it! Lol
 
Pre 64 post wwII Model 70 Featherweight values Via "Blue Book"
100% 98% 95% 90% 80% 70% 60%
$1,775 $1,550 1,375$ $1,225 $1,000 $900 $775

As a custom gun builder I would give you $800 just for the action due to the fact it looks almost pristine.

The scope and rings are almost worthless. The stock is worth about $100 if it is not buggered up or deteriorated.

I hope this gives you some perspective. Heirlooms are irreplaceable.

Nat Lambeth
 
Collector grade rifles especially in scarce chambering will go for much more than others and I would think the featherweights would go for more than the standard weight. For collectors condition means a lot but rarity does as well.

The newer CNC machined actions may be better shooters but the original specimens are worth more for what they are. Remington drove Winchester pretty much out of the market because they were able to make a cheaper rifle that shot well and was easier to mass produce. Post war production was aimed at reducing cost and enhancing profit while giving the customer value for less money spent.

Remington gave up on the controlled round feed not because it was inferior but because it was more expensive to produce. The "three rings of steel" and spring clip extractor was strong and super cheap to produce. Tubular actions were much easier to jig up and machine. Winchester never was able to regain the market shares they lost. Our loss. One could make a pretty good argument that Remington lost it's mind when Mike Walker retired.

Things move on, which direction largely depends on management...

Joe
 
$900 would be a good start with the blue wear and stock wear you have and that's if it still wears the original butt plate. Some pluses are original front sight with hood and rear sight. Hopefully it has not been glass bedded. If the Redfield is marked "made in Denver", it will be an added feature of interest to collectors.
 
Thanks for all the replies. I think I will list it on gunbroker with no reserve and see what the market says it’s worth.

As far as sentimental value...again, I have other rifles that my dad built and my first rifle he gave me that actually have sentimental value to me. Plus two storage units filled with his belongings....and he is still alive!


Thanks again.
 
It you where out of your mind ???? You could parts this Rifle out for $1000 .

The Action alone is $ 550 to $625 ..

Good Luck
 
LCazador said:
$900 would be a good start with the blue wear and stock wear you have and that's if it still wears the original butt plate. Some pluses are original front sight with hood and rear sight. Hopefully it has not been glass bedded. If the Redfield is marked "made in Denver", it will be an added feature of interest to collectors.
Click to expand...

Pretty sure it has the original butt plate...please see picture. Does not look like it was bedded.

DSC_0097 (Copy).JPG

boltface.jpg
 
Man no reserve is terrifying! Ive bought on gunbroker so cheap i almost felt bad. Make sure your spelling is perfect! Most of my deals were mis-somethinged which will greatly reduce your audience!
Seems like i saw an 8mm mouser go super cheap once.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,833
Messages
2,204,150
Members
79,148
Latest member
tsteinmetz

Share This Page

Back
Top