Br improved

[Lee Black]

Looking for a 6mm br improved reamer and dies. Looking to shoot 105 to 115

 

[johara1]

JGS. for a reamer and when you receive the reamer, get a 6mm Wilson die blank and make the seater from the reamer and get a Harrell's 6br imp full length die. and you are set....... Jim

 

[Phil]

JGS. for a reamer and when you receive the reamer, get a 6mm Wilson die blank and make the seater from the reamer and get a Harrell's 6br imp full length die. and you are set....... Jim

This^^^^^^^

 

[Liven The Dream]

Why not the New Dasher Norm Brass and Reamer from Bullets.com
No Fire forming Brass

 

[Lee Black]

Thanks guys makes it easier decision

 

[Lee Black]

JGS. for a reamer and when you receive the reamer, get a 6mm Wilson die blank and make the seater from the reamer and get a Harrell's 6br imp full length

 

[boltfluter]

Why not the New Dasher Norm Brass and Reamer from Bullets.com
No Fire forming Brass

I believe he is speaking of a 6BRAI and not a 6 Dasher. If I am reading this correctly.

Paul

 

[Liven The Dream]

I believe he is speaking of a 6BRAI and not a 6 Dasher. If I am reading this correctly.

Paul

Check out Bullets.com ! He has new Dasher Brass made by Norma. The Neck is .050 longer.
He sells a PT Reamer for the Brass.

I have all the stuff Now.

 

[dkhunt14]

Check out Bullets.com ! He has new Dasher Brass made by Norma. The Neck is .050 longer.
He sells a PT Reamer for the Brass.

I have all the stuff Now.

The 6 BRA is not the Dasher. It is simply a 6BR with a 40 degree shoulder. No fireforming needed. It's supposed to be alot easier to tune and very accurate. Good luck with your Norma Dasher brass, most everybody I know couldn't get the velocity and lost primer pockets. Matt

 

[LRPV]

Check out Bullets.com ! He has new Dasher Brass made by Norma. The Neck is .050 longer.
He sells a PT Reamer for the Brass.

I have all the stuff Now.

You want some more?

 

[kountryboy2]

I have 496 pieces if you don't have enough to suit his needs!

Tom

Is the normal brass that bad?

 

[jghoghunter]

You guys are stealing this guy's thread

 

[6MMsteve]

Is the normal brass that bad?

it's not as good as normal dasher 6br brass yes

 

[dkhunt14]

You guys are stealing this guy's thread

I believe there is only one answer and he got that in the first couple replies. Maybe the other answers will save him from buying the wrong brass. Matt

 

[jghoghunter]

Lee Black seems to know what he wanted and I bet wasn't going to buy the wrong brass. He was asking about reamer and dies not brass. It's Don that is confused and even after you, Matt explained it he was still confused. Lee hasn't been back since e the 6th reply.

 

[Raythemanroe]

I'm confused, would it be safer go with something with factory Info?


Ray

 

[Lee Black]

Lee Black seems to know what he wanted and I bet wasn't going to buy the wrong brass. He was asking about reamer and dies not brass. It's Don that is confused and even after you, Matt explained it he was still confused. Lee hasn't been back since e the 6th reply.

 

[Lee Black]

Thanks guys. You are right not interested in bullets.com new dasher brass. Has anybody used the bra in a repeater from ai mags? Do they need mag kits like some of the dashers?

 

[Danley]

Thanks guys. You are right not interested in bullets.com new dasher brass. Has anybody used the bra in a repeater from ai mags? Do they need mag kits like some of the dashers?

Yes, You will need the mag kit to keep the short case from trying to flip up.