• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Norma 6Dasher Brass

Kyle Schultz said:
I feel like a kid with a Willy Wonka golden ticket. :):):)
Click to expand...

Yup...that was my feeling too.

I also felt the same way when I got this sticker in one of the new boxes of berger bullets to do some load development. I wonder how many boxes it is going to be :D

20160502_141514_zpstp9ubade.jpg
 
earthquake said:
Says "Not available for immediate shipment". Sorry if I missed it, but when will it ship? Thanks!
Click to expand...


By the end of this month if all goes well.

Here's what happens:

1) Air shipment scheduled to leave May 16th.
2) Then Swedish Customs looks at it and processes it (has taken up to 10 days in the past)
3) Arrives in USA
4) US Customs processes it (not a long process unless they want to physically look at it)
5) Then, when released, it is shipped to us here in Bellingham, WA. That is where the first air shipment is coming.
6) We will then unpack, repack into smaller quantities of 100 and 500 and enter into computer system. We plan on putting a bunch of people on it so it does not get held up more than 24 hours here.

7) Then we ship.

So what seems like it should take just a few days for an air shipment, can take weeks.
 
Shiraz said:
By the end of this month if all goes well.

Here's what happens:

1) Air shipment scheduled to leave May 16th.
2) Then Swedish Customs looks at it and processes it (has taken up to 10 days in the past)
3) Arrives in USA
4) US Customs processes it (not a long process unless they want to physically look at it)
5) Then, when released, it is shipped to us here in Bellingham, WA. That is where the first air shipment is coming.
6) We will then unpack, repack into smaller quantities of 100 and 500 and enter into computer system. We plan on putting a bunch of people on it so it does not get held up more than 24 hours here.

7) Then we ship.

So what seems like it should take just a few days for an air shipment, can take weeks.
Click to expand...


Shiraz,

Thank you for your perseverance.

Dave
 
Shiraz said:
We have ordered the reamers for this new brass and the Model Number on that is T10902. It is made by Dave Kiff at Pacific Tool and Gauge and we will have these in stock probably before the brass shows up.

This reamer will have an overall length of 1.605" so you guys can trim to suit. Dave has indicated that this reamer will be exclusive to us so you can simply contact www.bullets.com. If you call them, they will refer to us. The model number above should be live on our site by the end of the day, and the reamer is called "6mm Dasher Norma"

Thanks.
Click to expand...
Shiraz, is 1.605" the brass length? I want to use all that neck, so I want a reamer .010"/.012" longer than the brass.
 
tclaunch said:
Shiraz, is 1.605" the brass length? I want to use all that neck, so I want a reamer .010"/.012" longer than the brass.
Click to expand...


The brass length raw is around 1.604 according to the drawings. You need to trim them to make them consistent.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,975
Messages
2,207,022
Members
79,238
Latest member
claydunbar

Share This Page

Back
Top