SirStart with an action that is made for WSM's or RSAUM's for box mag fed rifles. Even then it can be tricky getting a fat case to feed in that short a distance. Single stack mags are the only sure thing.
Thanks for your response. I sent 5 dummy rounds up to Kevin Wyatt and he was unable to obtain proper function. Have you successfully used one of his magazines orFor short actions http://wyattsoutdoor.com/product_info.php/cPath/1/products_id/37
for long actions http://wyattsoutdoor.com/product_info.php/cPath/1/products_id/63
Thank you. That might also work for my PRC.I built a 6.5 saum on a Rem700 LA action, I had to slightly open the feed rails on the magnum action for the fatter case to feed, but all I used was a regular rem700 RUM box with the windows cut in it. I didn't have any feeding issues with mine.
Thank you for your detailed reply. Do I understand you can use an Accurate 300 win mag magazine to feed the 6.5 saum in a LA R700 action? Did you have to alter the magazine lips for proper function? If so, my optimal solution is the AccurateMag bottom metal with the 5 shot 300wm magazine. I'm going to send you a PM.You say in the other 6.5 PRC thread you want to use a LA. I've used AI/Accurate 300WM mags to feed RSUAM's in a LA so I don't know why you wouldn't be able to get a PRC to function in one. I can get a PRC to function fine out of Accurate 300WSM mags in a short action. I can get RSUAM's to function in the same as well. RSUAM's are a bigger problem to get to feed out of box magazines. Some work fairly easy and some take a bunch of fiddling with. I'm sure I can get a PRC to function in a box easier than a RSUAM but haven't tried yet. Part of George Gardner's initial motivation for the PRC type case was just that, RSUAM's are a pain in a box and PRC's are less. At one point he came up with an expensive box (I believe a prototype maybe from Win M70 parts/design that he might have never sold commercially) that worked for the RSUAM's but it was too expensive so when he started doing the RSUAM's (6.5 GAP Xtreme Hunter) he went the Accurate mag route.
Thanks, one person who tried it said the first one or two feed and then the remainder would not pop up, the rear appearing to be the problem. I am still looking for someone who has actually had a success with the single stack magazine in a LA. The sa with an ultramag magazine does work for the prc and saumIf it will feed from an Accurate 300WM magazine it should fee fine from a Magpul magnum single stack AICS type magazine. I'm thinking from looking at it that it may need the magazine rails shortened just a bit to allow the tip to rise, or it may need a pad on the follower (I think less effective because it will just depress the spring and allow the follower to drop in front anyway). If I ever get a Nucleus long action (sigh, still waiting to order) I can do a little more definitive assessment.
This is why I like the Alpha mags for my 6.5 saum they may work better for the prc also.If it will feed from an Accurate 300WM magazine it should fee fine from a Magpul magnum single stack AICS type magazine. I'm thinking from looking at it that it may need the magazine rails shortened just a bit to allow the tip to rise, or it may need a pad on the follower (I think less effective because it will just depress the spring and allow the follower to drop in front anyway). If I ever get a Nucleus long action (sigh, still waiting to order) I can do a little more definitive assessment.
Are you using a long or short action? Which bottom metal?This is why I like the Alpha mags for my 6.5 saum they may work better for the prc also.
The the step in the follower and shorter lips work.
I'm using a short and anything that will except aics mags one I used in a element chassis the other was a pt&g bottom metal designed for the aics magsAre you using a long or short action? Which bottom metal?
Thanks
ThanksI'm using a short and anything that will except aics mags one I used in a element chassis the other was a pt&g bottom metal designed for the aics mags
Which Ultramag magazine are you using? I would like to see the setup if possible. I have had to tweak the internal extended mag box from PT&G to get the PRC to feed right in a sa. Plus mill out the rear of the Remington 700 sa, per instructions on Wyatts site. Thank you for any info you can share..Thanks, one person who tried it said the first one or two feed and then the remainder would not pop up, the rear appearing to be the problem. I am still looking for someone who has actually had a success with the single stack magazine in a LA. The sa with an ultramag magazine does work for the prc and saum
Bill