Windage chart for 600 yard F class target
- Thread starter dunraven
- Start date
Jay Christopherson
Not An Admin
They vary for 800/900/1000 because each of those distances use the same (1000 yard face) target. So 800 and 900 are almost like gimmes, right? ;-)
At 600, like 500 and 1000, the rings are .5 moa. I *think* the same goes for 300 as well, except that the x-ring itself on 300 is slightly smaller than .5 MOA.
At 600, like 500 and 1000, the rings are .5 moa. I *think* the same goes for 300 as well, except that the x-ring itself on 300 is slightly smaller than .5 MOA.
Go here and look them up.
http://competitions.nra.org/documents/pdf/compete/RuleBooks/HPR/hpr-book.pdf Page 69 & 70
BTW 300 yard target rings are not in moa. They are all undersize.
http://competitions.nra.org/documents/pdf/compete/RuleBooks/HPR/hpr-book.pdf Page 69 & 70
BTW 300 yard target rings are not in moa. They are all undersize.
Here are the sizes.
Just yesterday I copied/ cleaned up this info from the rule book.
F Class Target Dimensions
300 Yard Target
NRA MR-63FC - F-Class Target Center based on the MR-63 target for use at 300 yards.
To be pasted over the MR-63 target.
Aiming Black (inches)
X ring ………….1.42
10 ring............ 2.85
9 ring ………..5.85
8 ring ………..8.85
7 ring ………11.85
6 ring ...........17.85
Rings in white (inches)
5 ring............ 23.85
500 Yard Target
NRA MR-65FC - F-Class target Center based on the MR-65 target for use at 500 yards.
To be pasted over the MR-65 target.
Aiming Black (inches)
X ring ............. 2.50
10 ring............. 5.00
9 ring............. 10.00
8 ring............. 15.00
7 ring ............ 20.00
6 ring ............ 25.00
5 ring ............ 30.00
Rings in white (inches)
(None)
600 Yard Targets
NRA MR-1FC - F-Class target Center based on the MR-1 target for use at 600 yards.
To be pasted over the MR-1 target.
Aiming Black (inches)
X ring ............. 3.00
10 ring............. 6.00
9 ring............. 12.00
8 ring............. 18.00
7 ring ............ 24.00
6 ring ............ 36.00
Rings in white (inches)
5 ring ............48.00
800, 900, and 1000 Yard Target
NRA LRFC - F-Class Target Center based on the LR target for use at 1000 yards.
To be pasted over the LR target.
Aiming Black (inches)
X ring ……….. 5.00
10 ring............ 10.00
9 ring............. 20.00
8 ring............. 30.00
7 ring ............ 44.00
Rings in white (inches)
6 ring.............. 60.00
5 area ..….… 72x72 Sq
Just yesterday I copied/ cleaned up this info from the rule book.
F Class Target Dimensions
300 Yard Target
NRA MR-63FC - F-Class Target Center based on the MR-63 target for use at 300 yards.
To be pasted over the MR-63 target.
Aiming Black (inches)
X ring ………….1.42
10 ring............ 2.85
9 ring ………..5.85
8 ring ………..8.85
7 ring ………11.85
6 ring ...........17.85
Rings in white (inches)
5 ring............ 23.85
500 Yard Target
NRA MR-65FC - F-Class target Center based on the MR-65 target for use at 500 yards.
To be pasted over the MR-65 target.
Aiming Black (inches)
X ring ............. 2.50
10 ring............. 5.00
9 ring............. 10.00
8 ring............. 15.00
7 ring ............ 20.00
6 ring ............ 25.00
5 ring ............ 30.00
Rings in white (inches)
(None)
600 Yard Targets
NRA MR-1FC - F-Class target Center based on the MR-1 target for use at 600 yards.
To be pasted over the MR-1 target.
Aiming Black (inches)
X ring ............. 3.00
10 ring............. 6.00
9 ring............. 12.00
8 ring............. 18.00
7 ring ............ 24.00
6 ring ............ 36.00
Rings in white (inches)
5 ring ............48.00
800, 900, and 1000 Yard Target
NRA LRFC - F-Class Target Center based on the LR target for use at 1000 yards.
To be pasted over the LR target.
Aiming Black (inches)
X ring ……….. 5.00
10 ring............ 10.00
9 ring............. 20.00
8 ring............. 30.00
7 ring ............ 44.00
Rings in white (inches)
6 ring.............. 60.00
5 area ..….… 72x72 Sq
Here's the data for 600yd F-Class, assuming your scope is 8 clicks per MOA.
600 yd tgt clicks to centerHowever, when you add half-a-30-cal-bullet-diameter to the 300 yard ring sizes, the "effective" sizes of the scoring rings suddenly seem a lot more rational MOA-wise.
For example, the 300y 10-ring is 2.85". Add 0.15" to this (in round numbers half a .30 cal bullet) and you see that your shots are scored to a 3.00" effective diameter...... which looks an awful lot just like the 1-MOA F-Class 10-ring at 600y, 500y, 1000y etc...
johnnyi
Gold $$ Contributor
Nice..!Here's the data for 600yd F-Class, assuming your scope is 8 clicks per MOA.
Do you happen to have these for 300 and 1000?
^^ I agree, already printed that out for the match this weekend.
Sorry, no because I only shoot at 600 yards. But anyone with Photoshop skills and math skills sufficient to multiply and divide can make one for a different distance and/or a different sized target.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.