Which case neck chamfering tools work best for you?

[Tommie]

this because you can get consistent chamfering from case to case if you trim all the same first. it indexes on the flash hole. they make a shallower one also, but i like the vld.

Amazon.com

then this for the outside, 4 blades work better than 3, less slipping.

Hornady Case Prep Center 4-Blade Outside Diameter Deburring Tool

Designed to remove the burrs from the outside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet...

ads.midwayusa.com

Where’s the 4th blade?

 

[rlporter507]

It's in the pic?.?

 

[Jim Ziegler]

Jim Ziegler - I read a comment in another post that Giraud can trim case mouths to the extent that a sharp edge occurs resulting in hand/finger cuts if people aren't careful. What has been your experience?

I've never experienced anything like that.

 

[BHP9]

I use an RCBS (LE Wilson) rocket deburrer but only the outside deburr and a Lyman Wooden handled VLD inside deburrer.

Happy with the results.

 

[D-4297]

RCBS Trim Pro II with the 3-way head . PITA to set , but once it's set , it's great . Will hold + /- .001 all day .

 

[SKWERLZ]

I’ve been wondering about sharpening my outside chamfer tool. I don’t think it was ever particularly sharp even when new. Have you tried sharpening those before?

I sharpen mine occasionally.
They definitely get dull over time.

I’d like to find a higher quality tapered reamer with an appropriate angle.

 

[Dgd6mm]

I bought a Hornaday Duo and use my Lyman inside VLD chamfering tool with the Hornaday Duo outside chamfering tool. It does a very good job and fairly easy on your hands and wallet.

 

[Fire Dog]

For precision, repeatable inside chamfering it is hard to go past KM’s VLD tapered tool that with the addition of the 1/4” Hex driver lets you use a small screwdriver type drill.

Case Neck Chamfer Tools (Controlled Depth Tapered Reamers)

A shallow angle chamfer on the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth.

kmshooting.com

1/4'' Hex Drive Adapter 5/16-18 for Tapered Reamer - K+M Precision Shooting Products

1/4'' Hex Drive Adapter 5/16-18 for Tapered Reamer

kmshooting.com