Walther KK300 trigger help

[butchlambert]

Can the trigger be adjusted to eliminate most of the creep? Can somebody do the adjustments with just the trigger assembly in hand? Who can do it for me?

 

[pfiori]

Here is a link to the manual for that rifle/trigger.

https://carl-walther.com/uploads/media/manuals/KK300_Bed.pdf

If the trigger is not worn or damaged and clean and lubricated you should be able to adjust it to break cleanly. It needs to be attached to an action to be adjusted.

 

[butchlambert]

Thank you.

 

[kevin nevius]

The most important thing to remember, is that the sear engagement adjustment screw (the most important related to felt "creep") is very sensitive to even very small movement / adjustment.

You will want to turn it is small fractions of a revolution (say 10 degree increments), and walk up to a zero creep condition. You will know when you went past it because trigger break will get very light and erratic. Back it off the 10 degrees from that position and you will be good to go.

This trigger is difficult to get adjusted perfectly, but when you do, it is one of the very best out there. I have used one for many seasons - its one of my favorites.

kev

 

[butchlambert]

Thanks for all the help. Trying to make this thing into a club BR rifle. The BR stock is about ready for a finish and I need to bore a tuner that I built many years ago to fit the muzzle.